Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car

Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
- Systems of decrease in toxicity of the fulfilled gases and engine management
   General information
   System of multiposition injection of fuel (MPFI) and information sensors - the description
   Removal and installation of the electronic module of management (RSM)
   Description of the principle of action of system of self-diagnostics and procedure of reading of codes of malfunctions
   Information sensors
   System of the operated ventilation of a case (PCV)
   System of recirculation of the fulfilled gases (EGR)
   System of catching of vapors of fuel (EVAP)
   Catalytic converter
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation

Removal and installation of the electronic module of management (RSM)

Avoid impact on RSM of static electricity. Before touching the module, dump saved up by own body (and clothes) electricity, having touched car body metal. At storage of the module use special antistatic linings - ask in shops of automobile accessories.


  1. Disconnect a negative wire from the battery.
  2. Remove a broad tank of the cooling system (The head of the Cooling system, heating and air conditioning).
  3. Give a fixing bolt of the holder of a plait of wires of the RSM electric socket.
  1. Give a bolt (shooter) of fastening of the RSM electric socket.
  1. Give bolts of fastening of RSM in a motive compartment and take assembly from the car.
  2. You make installation upside-down.