Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
- Power supply system and production of the fulfilled gases
   General information
   Procedure of dumping of pressure of fuel
   Check of pressure of fuel and functioning of the fuel pump
   Removal and installation of the fuel tank
   Cleaning and repair of the fuel tank - the general information
   Repair and replacement of fuel lines
   Removal and installation of the fuel pump
   Check of serviceability and replacement of the block of the fuel level sensor
   Removal and installation of assembly of the air cleaner
   Replacement of a cable of gas
   System of injection of fuel - the general information
   Check of serviceability of system of injection of fuel
   Serviceability check, removal and installation of the case of a throttle
   Check of serviceability and replacement of the regulator of pressure of fuel
   Serviceability check, removal and installation of injectors of fuel
   Check of functioning and replacement of components of system of stabilization of turns of idling (IAC)
   Service of system of production of the fulfilled gases - the general information
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Removal and installation of assembly of the air cleaner

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. Uncover the air cleaner and an element of the air filter (The head Nastroyki and routine maintenance).
  3. Release the clips fixing an air inlet sleeve to an air cleaner casing.

Components of assembly of the air cleaner of engines with a capacity of 4.0 l.

Components of the air cleaner of engines with a capacity of 5.2 l.
  1. Give bolts of fastening of a casing of the air cleaner in a motive compartment.
  1. Give bolts (shooters) of fastening of a casing of the air cleaner in a motive compartment.
  1. Lift assembly up and disconnect it from a sleeve of an intake of fresh air, then take assembly from a motive compartment.
  2. You make installation upside-down.