Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
- Power supply system and production of the fulfilled gases
   General information
   Procedure of dumping of pressure of fuel
   Check of pressure of fuel and functioning of the fuel pump
   Removal and installation of the fuel tank
   Cleaning and repair of the fuel tank - the general information
   Repair and replacement of fuel lines
   Removal and installation of the fuel pump
   Check of serviceability and replacement of the block of the fuel level sensor
   Removal and installation of assembly of the air cleaner
   Replacement of a cable of gas
   System of injection of fuel - the general information
   Check of serviceability of system of injection of fuel
   Serviceability check, removal and installation of the case of a throttle
   Check of serviceability and replacement of the regulator of pressure of fuel
   Serviceability check, removal and installation of injectors of fuel
   Check of functioning and replacement of components of system of stabilization of turns of idling (IAC)
   Service of system of production of the fulfilled gases - the general information
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Replacement of a cable of gas

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. The stupid screw-driver hook a tip of a cable and take it from the lever of a butterfly valve.
  1. Having carefully hooked the screw-driver a gas cable tip, take it from the lever of a butterfly valve.
  1. Press a lock uvula and release the holder from an arm.
  1. Press a lock uvula and release a gas cable from an arm.
  1. Separate a gas cable from assembly of the case of a throttle.

Components of a cable of gas of the engine with a capacity of 4.0 l.

Components of a cable of gas of the engine with a capacity of 5.2 l.
  1. Under the dashboard disconnect a cable from the accelerator pedal.

Components of assembly of a pedal and cable of gas.

  1. Take the plug through passage from a partition of a motive compartment and, having stretched a cable through a partition, take it from the car from a motive compartment.
  2. You make installation upside-down.