Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
- Settings and routine maintenance
   - Schedule of routine maintenance of Jeep Cherokee
      Introduction
      General information on settings
      Checks of levels of liquids (each 400 km (250 miles) of a run or weekly)
      Check of a condition of tires and pressure in them (each 400 km (250 miles) of a run or weekly)
      Check of level of liquid of automatic transmission (each 400 km (250 miles) of a run or weekly)
      Check of level of liquid of system of hydrostrengthening of a wheel (each 4800 km (3000 miles) of a run or time in 3 months)
      Change of motive oil and oil filter (each 4800 km (3000 miles) of a run or time in 3 months)
      Check and service of the battery (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of serviceability of the cooling system (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of a state and replacement of the hoses passing under a cowl (each 4800 km (3000 miles) of a run or times in 3 months)
      Check of a state and replacement of brushes of screen wipers (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of a condition of a suspension bracket and steering
      Check of a condition of system of production of the fulfilled gases (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of gearbox oil of the manual transmission (RKPP) (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of oil of the transfer case of all-wheel drive (4WD) models (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of oil of differential (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Rotation of wheels (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of brake mechanisms (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of components of a power supply system (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a state, adjustment of a tension and replacement of a driving belt (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of seat belts (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of functioning of the sensor switch of permission of start (only models with AT) (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Chassis lubricant (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Replacement of the air filter (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of liquid and the filter of automatic transmission (each 48 000 km (30 000 miles) of a run, or time in two years)
      Adjustment of tapes of the automatic transmission (AT) (model since 1994 of the issue) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of gearbox oil of a manual box (switching) of transfers (RKPP) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Change of oil of the transfer case (model 4WD) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Differential oil change (each 48 000 km (30 000 miles) of a run, or time in two years)
      Service of the cooling system (depletion, washing and filling) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of a state and replacement of the valve of system of the operated ventilation of a case (PCV) (V8 engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check, clearing and replacement of a hose of system of continuous ventilation of a case (CCV) (the 6th cylinder engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of serviceability of functioning of system of catching of vapors of fuel (each 48 000 km (30 000 miles) of a run, or time in two years)
      Cleaning of the filter of ventilation of a case (V8 engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of the fuel filter (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of spark plugs (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of a condition of candle wires, a cover and the runner of the distributor (each 48 000 km (30 000 miles) of a run, or time in two years)
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Change of oil of the transfer case (model 4WD) (each 48 000 km (30 000 miles) of a run, or time in two years)

 PERFORMANCE ORDER

  1. Make on the car a trip length at least of 25 km (15 miles) for warming up of oil of the transfer case up to the normal working temperature. If the car is equipped with the four-wheel drive, it is desirable to make a warming up of oil in the mode 4WD. During a trip it is necessary to use all transfers, including back. It will give a guarantee of a sufficient warming up of oil for a free effluence it from a box.
  2. The car also establish to Poddomkratta it on props.
  3. Remove a jellied stopper of the transfer case (see an illustration).
  4. From the lower part of a case of a box turn out a drain stopper - it will provide a guarantee of free discharge of oil.
  1. For removal of a drain stopper of the transfer case use a cap key.
  1. Carefully clear a drain stopper and after full depletion of a box screw it into place, having tightened with the required effort.
  2. Fill in in a box oil of the required grade so that its surface appeared level with the lower cut of a jellied opening.
  3. Establish into place and strongly tighten a jellied/control stopper.
  4. Lower the car on the earth and after short, in several kilometers, trips repeat check of level of oil in the transfer case. Often at the same time it is required to make small having added.