Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
- Settings and routine maintenance
   - Schedule of routine maintenance of Jeep Cherokee
      Introduction
      General information on settings
      Checks of levels of liquids (each 400 km (250 miles) of a run or weekly)
      Check of a condition of tires and pressure in them (each 400 km (250 miles) of a run or weekly)
      Check of level of liquid of automatic transmission (each 400 km (250 miles) of a run or weekly)
      Check of level of liquid of system of hydrostrengthening of a wheel (each 4800 km (3000 miles) of a run or time in 3 months)
      Change of motive oil and oil filter (each 4800 km (3000 miles) of a run or time in 3 months)
      Check and service of the battery (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of serviceability of the cooling system (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of a state and replacement of the hoses passing under a cowl (each 4800 km (3000 miles) of a run or times in 3 months)
      Check of a state and replacement of brushes of screen wipers (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of a condition of a suspension bracket and steering
      Check of a condition of system of production of the fulfilled gases (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of gearbox oil of the manual transmission (RKPP) (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of oil of the transfer case of all-wheel drive (4WD) models (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of oil of differential (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Rotation of wheels (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of brake mechanisms (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of components of a power supply system (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a state, adjustment of a tension and replacement of a driving belt (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of seat belts (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of functioning of the sensor switch of permission of start (only models with AT) (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Chassis lubricant (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Replacement of the air filter (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of liquid and the filter of automatic transmission (each 48 000 km (30 000 miles) of a run, or time in two years)
      Adjustment of tapes of the automatic transmission (AT) (model since 1994 of the issue) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of gearbox oil of a manual box (switching) of transfers (RKPP) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Change of oil of the transfer case (model 4WD) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Differential oil change (each 48 000 km (30 000 miles) of a run, or time in two years)
      Service of the cooling system (depletion, washing and filling) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of a state and replacement of the valve of system of the operated ventilation of a case (PCV) (V8 engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check, clearing and replacement of a hose of system of continuous ventilation of a case (CCV) (the 6th cylinder engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of serviceability of functioning of system of catching of vapors of fuel (each 48 000 km (30 000 miles) of a run, or time in two years)
      Cleaning of the filter of ventilation of a case (V8 engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of the fuel filter (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of spark plugs (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of a condition of candle wires, a cover and the runner of the distributor (each 48 000 km (30 000 miles) of a run, or time in two years)
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Check of level of oil of differential (each 12 000 km (7500 miles) of a run, or time in 6 months)

All-wheel drive (4WD) models are equipped with two differentials - levels of oil have to be checked in both.

The forward differential is equipped with a carving stopper of control of the level/gulf of oil whereas on back differential the jellied opening is muffled by a rubber stopper plug. For check of levels of oil in differentials both stoppers have to be removed. If the car поддомкрачен for simplification of access to a stopper, take care of reliability of its installation on props - AT ALL do not perform any works under the car, the lifted state fixed in only by means of a jack(s)! For a guarantee of reliability of results of check the car has to be installed strictly horizontally.

 PERFORMANCE ORDER

  1. Remove a stopper of control of the level/gulf of oil on a differential case cover.
  1. By means of the ratchet drive complete with the extender on 3/8 inches (9 mm) turn out a stopper of control of the level/gulf of oil of forward differential.
  1. On back differential the small screw-driver hook a rubber stopper and take it from a jellied opening - pay attention to the data of the case of differential of a label (shooter) fixed on a cover containing important information.
  1. Level of oil has to reach the lower cut of a jellied opening. If this condition is not satisfied, make having added by means of the syringe or a butterdish with elastic walls. Having added you produce only oils of the required grade and continue it until oil does not begin to follow too much openings. On some models (in particular equipped with differential of limited sliding) around installation of a stopper the label with data on requirements to an oil grade fastens.
  2. Establish a stopper into place and strongly tighten it.