Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
- Settings and routine maintenance
   - Schedule of routine maintenance of Jeep Cherokee
      Introduction
      General information on settings
      Checks of levels of liquids (each 400 km (250 miles) of a run or weekly)
      Check of a condition of tires and pressure in them (each 400 km (250 miles) of a run or weekly)
      Check of level of liquid of automatic transmission (each 400 km (250 miles) of a run or weekly)
      Check of level of liquid of system of hydrostrengthening of a wheel (each 4800 km (3000 miles) of a run or time in 3 months)
      Change of motive oil and oil filter (each 4800 km (3000 miles) of a run or time in 3 months)
      Check and service of the battery (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of serviceability of the cooling system (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of a state and replacement of the hoses passing under a cowl (each 4800 km (3000 miles) of a run or times in 3 months)
      Check of a state and replacement of brushes of screen wipers (each 4800 km (3000 miles) of a run or time in 3 months)
      Check of a condition of a suspension bracket and steering
      Check of a condition of system of production of the fulfilled gases (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of gearbox oil of the manual transmission (RKPP) (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of oil of the transfer case of all-wheel drive (4WD) models (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of level of oil of differential (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Rotation of wheels (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of brake mechanisms (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of components of a power supply system (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a state, adjustment of a tension and replacement of a driving belt (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of a condition of seat belts (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Check of functioning of the sensor switch of permission of start (only models with AT) (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Chassis lubricant (each 12 000 km (7500 miles) of a run, or time in 6 months)
      Replacement of the air filter (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of liquid and the filter of automatic transmission (each 48 000 km (30 000 miles) of a run, or time in two years)
      Adjustment of tapes of the automatic transmission (AT) (model since 1994 of the issue) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of gearbox oil of a manual box (switching) of transfers (RKPP) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Change of oil of the transfer case (model 4WD) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Differential oil change (each 48 000 km (30 000 miles) of a run, or time in two years)
      Service of the cooling system (depletion, washing and filling) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of a state and replacement of the valve of system of the operated ventilation of a case (PCV) (V8 engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check, clearing and replacement of a hose of system of continuous ventilation of a case (CCV) (the 6th cylinder engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of serviceability of functioning of system of catching of vapors of fuel (each 48 000 km (30 000 miles) of a run, or time in two years)
      Cleaning of the filter of ventilation of a case (V8 engines) (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of the fuel filter (each 48 000 km (30 000 miles) of a run, or time in two years)
      Replacement of spark plugs (each 48 000 km (30 000 miles) of a run, or time in two years)
      Check of a condition of candle wires, a cover and the runner of the distributor (each 48 000 km (30 000 miles) of a run, or time in two years)
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Check of a condition of system of production of the fulfilled gases (each 12 000 km (7500 miles) of a run, or time in 6 months)

 PERFORMANCE ORDER

  1. At the cold engine (at least three hours later after end of a trip) completely examine system of release from a final collector to a cut of an exhaust pipe. Try not to touch with open parts of the body the catalytic converter which can remain strongly warmed and three hours later after an engine stop. For providing easy access to components of system of release an inspection should be carried out on the car lifted on the winch or installed on platforms/props.
  2. Check exhaust pipes and knots of joining of sections of system for existence of traces of leak of the fulfilled gases and/or the corrosion which is signs of the coming exit of elements of system out of operation. Make sure that all arms and suspensions of system are in satisfactory condition and are reliably fixed.
  3. Examine the car bottom on existence of holes, traces of corrosion, the dispersed seams and other defects thanks to which there can be a penetration of the fulfilled gases into interior of the car. Seal all openings with silicone or body hard putty.
  4. The roars and other noise arising at the movement of the car can often be a consequence of failure of components of system of release, in particular its arms, support, suspensions, and also weakening of fixture of thermofilters. Try to move pipes, mufflers and the catalytic converter. If any of components contact with elements of a suspension bracket or a body of the car, fix them by new suspensions and arms.
  1. Check rubber components of support and suspensions of system of production of the fulfilled gases for existence of signs of damages.