Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
- Governing bodies and methods of operation
   Acquaintance to the car
   Start of the engine and driving
   Dashboard and equipment of salon
   Towage of the trailer
   Emergency towage of the car
   Towage of the car for the purpose of start of the engine



Towage of the car for the purpose of start of the engine

All-wheel drive models

In order to avoid losses of oil do not disconnect the back driveshaft from the transfer case.


 PERFORMANCE ORDER

  1. Switch transmission to a neutral.
  2. Transfer a control lever the transfer case to neutral situation (a control lamp of the all-wheel drive mode and illumination of four wheels on the outline drawing of the car on the screen of the graphic display have to go out.
  3. Turn on the transfer case on transfer, AT - in situation D and make sure that the car cannot move out from the place.
  4. For shutdown of blocking of a steering column turn the ignition key in position of OFF.
  5. Transfer AT to situation P.
  6. Connect the car a rigid hitch to the towing vehicle.

Do not cling a towing beam for a car bumper at all!

Models 2WD

The back driveshaft during towage has to be disconnected from transmission - the opening in a case in order to avoid losses of oil should be muffled a stopper. Translate the lever of the selector of transfers to situation P. Before beginning the independent movement do not forget to connect into place the driveshaft and to check the level of gearbox oil.