Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
- Governing bodies and methods of operation
   Acquaintance to the car
   Start of the engine and driving
   Dashboard and equipment of salon
   Towage of the trailer
   Emergency towage of the car
   Towage of the car for the purpose of start of the engine



Emergency towage of the car

General information

In order to avoid failure of the transfer case do not use the equipment capable to interfere with rotation of wheels for towage at all.

Towage all-wheel drive without shutdown of the mode 4WD in order to avoid failure of the transfer case of models has to be made on a loader.

Models 4WD with a possibility of shutdown of the forward bridge can be towed with only forward wheels lifted above the ground. Track that the transfer case was installed in neutral situation, AT - in situation P, RKPP - on transfer.

In order to avoid an oil effluence from the transfer case do not disconnect the back driveshaft.

All-wheel drive models

Models with the COMMAND-TRAC transfer case

In the presence of the ignition key

RKPP

Turn the ignition key in position of OFF to unblock a steering column. Include transmission on transfer, transfer the transfer case to a neutral.

AT

Unblock a steering column and the mechanism of gear shifting, having turned the ignition key in position of OFF. Transfer AT to situation P, install the transfer case on a neutral.

In the absence of available ignition key, but open car

RKPP

Include transmission on transfer, transfer the transfer case to a neutral.

AT

Transfer AT to situation P, install the transfer case on a neutral.

In the absence of available ignition key and the closed RKPP and AT car

You make towage with the forward wheels raised above the ground.

Models with the SELEC-TRAC/QUADRA-TRAC transfer case

In the presence of the ignition key

Turn the ignition key in position of OFF to unblock a steering column and the mechanism of gear shifting. Transfer AT to situation P, install the transfer case on a neutral.

In the absence of available ignition key, but open car

Make sure that transmission is in situation P, switch the transfer case to a neutral.

In the absence of available ignition key and the closed car

You make towage with the forward wheels raised above the ground.

Towage of the car in the absence of a possibility of the transfer of the transfer case to neutral situation

Turn the ignition key in position of OFF.

Transfer transmission to neutral situation.

You make towage with the forward wheels which are torn off from the earth.

If it is necessary to tow the car with the back wheels which are torn off from the earth, surely unblock a steering column (the lock is not capable to sustain the pushes occurring during towage). Then record a steering wheel by means of the strong clips which are specially developed for this purpose.

Models 2WD

Towage should be made with the transmission established in neutral situation and with the speeds which are not exceeding 50 km/h (30 miles/h). The maximum range of towage should not exceed 25 km (15 miles), otherwise it is necessary to use a trailer, or to tow the car with the forward wheels which are torn off from the earth.