Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
- Governing bodies and methods of operation
   Acquaintance to the car
   Start of the engine and driving
   Dashboard and equipment of salon
   Towage of the trailer
   Emergency towage of the car
   Towage of the car for the purpose of start of the engine



Dashboard and equipment of salon

Dashboard and understeering switches

General information

At the switched-off ignition measuring instruments of the dashboard can issue inexact indications. In need of receiving reliable information at the killed engine turn the ignition key in position of ON (see an illustration).

The scheme of an arrangement of components of the dashboard is submitted on an illustration.

The scheme of an arrangement of components on the dashboard

1 — the Ventilating nozzle
2 — the Combination of devices
3 — the Radio receiver
4 — Ventilating nozzles
5 — the Ware box
6 — the Ventilating nozzle
7 — the Assembly block of safety locks
8 — the Control panel the provision of side mirrors

9 — the Control panel external lighting fixtures and illumination of the panel
10 — Switches of management of a cleaner/washer and heater of back glass, the switch of blocking of the O/D OFF OD mode
11 — the Graphic display or an information display
12 — the Control panel of functioning of systems of heating, ventilation and air conditioning of salon

Combination of devices

Along with refusal of a speedometer, tachometer or measuring instruments of motive oil and temperature of cooling liquid there is always a violation of functioning of the module of a safety cushion! The movement with the faulty module of a pillow is dangerous! Check a condition of a safety lock No. 22 in the assembly block.

In left we string to a corner of a combination of devices usually the measuring instrument of fuel consumption settles down (1).

Combination of devices

1 — fuel consumption Measuring instrument
2 — the Voltmeter
3 — the Tachometer
4 — the Speedometer
5 — the Odometer
6 — the Measuring instrument of pressure of motive oil
7 — the Measuring instrument of temperature of cooling liquid
8 — the Control lamp of indexes of turns
9 — the Button of dumping of indications of the counter of range of the current trip
10 — the Counter of range of the current trip
11 — the Control lamp of low level of fuel

12 — the Control lamp of ABS
13 — the Control lamp of raising of the parking brake
14 — the Control lamp "Check the engine"
15 — the Control lamp of switching to higher transfer
16 — the Control lamp of a safety cushion
17 — the Control lamp of driving beam of head headlights
18 — the Control lamp "Fasten belts"
19 — the Control lamp of the anticreeping alarm system

It is above and slightly more to the right there is a voltmeter (2) which indications allow to determine the level of a charge of the rechargeable battery and serviceability of functioning of system of a charge. Lowering of an arrow in a red zone of low level of a charge warns that the battery, perhaps, is incapable to carry out start of the engine. For the working engine the range of indications of the voltmeter from 11 to 15 Century is normal. The long indication in 9 ÷ 11 V or over 15 V confirms failure of the generator, regulator of tension or the battery. Address for consultation specialists of car service.

The big round board located more to the left is the indicator of the measuring instrument of turns of the engine (tachometer) (3). A unit of measure of a tachometer is rpm.

Do not allow leaving of an arrow of a tachometer in a red zone of a scale of its board - serious damage of the power unit can appear result!

The right big round board belongs to a speedometer (4). On the dial of the measuring instrument two scales allowing to determine the speed of the movement of the car in miles/h (the main scale) and km/h (an auxiliary scale) are put. Range of measurement of a speedometer makes from 0 to 100 miles/h (0 ÷ 160 km/h).

In the speedometer dial, slightly above an axis his shooters there is a counter of a full run of the car (odometer) (5). The counter is sealed up, broken into eight divisions and measures a car run to within the tenth shares of mile.

Under an arrow of a speedometer the counter of range of the current trip settles down (10). The button of dumping of indications of the counter (9) is on the right below under the speedometer dial.

More to the right on one speedometer with it level placed the measuring instrument of pressure of motive oil (6). Indications of the counter do not determine oil level in an engine case. Value 20 ÷ 60 psi (1.4 ÷ 4.2 kgfs/cm2) in city or 45 ÷ 60 psi (3.2 ÷ 4.2 kgfs/cm2) at movement along the highway is normal. Pressure can change depending on turns of the engine, temperature and viscosity of the oil filled in it. For the heated-up engine working at single turns as norm the indication in 13 psi (0.91 kgfs/cm2) is. The constant low indication of the measuring instrument testifies about violation of serviceability of functioning of the lubrication system - consult at specialists of dealer office of the Chrysler company.

In the right bottom corner of a combination of devices the measuring instrument of temperature of cooling liquid (7) is placed. A device arrow exit in the red range of a scale of the measuring instrument testifies to an engine overheat - at the same time it is necessary to muffle immediately it and to ask immediately for the help in the closest workshop of car service.

Try not to leave the switched-on engine for a long time unguarded. The long overheat of the engine (if that occurs) is fraught with serious damages and expensive repair.

Control lamp of indexes of turns (8) begin to blink at inclusion of the corresponding index (right or left).

The control lamp of low level of fuel (11) informs the driver on approach to the end of a reserve of fuel and lights up when in a gasoline tank there are about 11.2 l of fuel. Anew the lamp can start only to blink, especially at the moments of commission of turns, braking and acceleration as fuel weight in a tank at the same time is shaken.

The control lamp of ABS (12) lights up for a short time at start the engine, informing the driver that knots of system function regularly. If the lamp does not die away after completion of start of the engine or lights up during the movement, it demonstrates identification by system of self-diagnostics of ABS of internal malfunctions. At the same time the brake system continues to function in the usual mode, however ABS is disconnected. Switching off, and then inclusion of ignition can put into operation system of anti-blocking of brakes again. If the lamp continues to join also after restarts of the engine, address for consultation in dealer office of the Chrysler company. If control lamps of ABS and the parking brake at the same time light up, address in a workshop of car service immediately.

The control lamp of raising of the parking brake (13) at the included ignition informs the driver that the parking brake is cocked. The lamp also warns about falling of level and pressure of brake fluid in hydraulic system - in this case it is necessary to ask immediately for the help experts.

If a control lamp "Check the engine" (14) it is necessary to burn after start of the engine, or joins in time of the movement, it speaks about possible violations of functioning and/or need of performing procedures of routine maintenance of the engine. Though the car does not lose at the same time working capacity and does not need towage, follows at the first opportunity to show it to specialists of dealer office of the Chrysler company.

Long operation of the car with the included lamp "Check the engine" can lead to serious damages of components of systems of decrease in toxicity of the fulfilled gases, but also, at the same time fuel consumption can increase considerably. The blinking of a control lamp means about a possibility of approach of fast failure of the catalytic converter and serious decrease in efficiency of return of the engine - it is necessary to address immediately in a workshop of car service. At engine launch the control lamp has to light up for a short time, informing the driver on serviceability of the state.

The control lamp of switching to higher transfer (15) is provided on all models with RKPP and informs the driver on need of increase in transfer at dispersal of the car for the purpose of maintenance of the most effective mode of fuel consumption.

The control lamp of a safety cushion (16) lights up and remains lit on 6 ÷ 8 seconds at the first inclusion of ignition. If the lamp does not die away after a successful completion of start of the engine or joins in time of the movement, the system of a safety cushion needs urgent check with attraction of efforts of specialists of dealer office of the Chrysler company.

The control lamp of driving beam of head headlights (17) informs the driver that head headlights of the car function in the mode of driving beam.

Control lamp "Fasten belts" (18) in combination with an alarm buzzer warn the driver and passengers when landing in the car about need to be fastened. When fastening buckles of seat belts the buzzer is disconnected, and the lamp continues to burn within about 6 seconds.

The control lamp of anticreeping system (19) confirms turning on of the alarm system. At the serviceable alarm system the lamp has to blink. If the lamp burns continuously, therefore the system failed.

Module of the graphic display of all-wheel drive models

On some models the module of the graphic display can is replaced with information tabl (see the following subsection).

The module of the graphic display of models 4WD is located in the bottom of the central part of the dashboard. On the screen of the display the outline drawing of the car which wheels can be highlighted by blue or green light is placed, informing the driver on the chosen mode of the transfer case. The car contour on the screen will have during daylight hours a white background which will be transformed to a bluish or bluish luminescence at night. To the left of a contour of the car the indicators of the PART-TIME and LO modes illuminated yellow and FULL-TIME illuminated by green are located.
Location of the module of the graphic display on the dashboard of all-wheel drive models.

Models with the COMMAND-TRAC transfer case

At the choice of the mode 2WD on the outline drawing of the car back wheels of the car are highlighted and no indicators light up. When switching in the mode of changeable turning on of the four-wheel drive (PART-TIME 4WD) all four wheels in combination with the yellow PART-TIME indicator are highlighted. In the neutral provision of a control lever of the transfer case the screen of the display will be extinguished. The mode of constant turning on of the four-wheel drive (FULL-TIME 4WD) is followed by highlighting of four wheels on the outline drawing of the car, plus green FULL-TIME indicator.

Models with the SELEC-TRAC transfer case

At the choice of the mode 2WD on the outline drawing of the car back wheels of the car are highlighted and no indicators light up. When switching in the mode of changeable turning on of the four-wheel drive (PART-TIME 4WD) all four wheels in combination with the yellow PART-TIME indicator are highlighted. The mode of constant turning on of the four-wheel drive (FULL-TIME 4WD) is followed by highlighting of four wheels on the outline drawing of the car, plus green FULL-TIME indicator. In the neutral provision of a control lever of the transfer case the screen of the display will be extinguished. In the mode of the lowering transfer of changeably switched on four-wheel drive (4LO - PART-TIME 4WD) highlight also all four wheels of the car and the PART-TIME indicator.

Models with the QUADRA-TRAC transfer case

The mode of the four-wheel drive is designated by inclusion of illumination of all four wheels on the outline drawing of the car on the display screen. At inclusion of the lowering mode 4LO in addition to illumination of four wheels the LO indicator turns on. In the neutral provision of a box remains it will be extinguished.

Information center of the car

General information

On some models the place of the graphic display on the dashboard of the car is taken by a special information display. On the screen of a board the outline drawing of the car, and more to the right of it - windows of the electronic display with two buttons of management is located.
Location of an information display on the dashboard of all-wheel drive models.

The control center of the indication of an information display performs four main functions: highlighting on the screen of the current time and date; tracking of parameters of functioning of some systems of the car and the notice of the driver on the revealed violations (see in the item. "Notices of information center..."); highlighting of a reminder on need of performing procedures of routine maintenance; and highlighting of the chosen mode of the transfer case.

Notices of information center are issued in the form of the visual message accompanied with a sound buzzer. The following messages of the center are the most typical:

  • Leaky closing of doors (Door Ajar) - delivery of five (by quantity of doors) various type of messages on leaky closing of doors Is possible. Each of car doors, and also folding glass of a door of a back are equipped with special sensors which operation provides emergence on the screen of an information display of the corresponding message. In addition to the message on the outline drawing of the car the door demanding check is highlighted. After all doors / folding back glass boards are densely closed has to go out.
  • The refusal of back lamps (Rear Lamp Failure) - This message appears on the board screen at failure of lamps of stoplights and back marker lights. To remove the message from the screen replace the burned-down lamps.
  • The refusal of stoplights (Turn Signal On) - This message is highlighted appears in that case when forgotten included in the index of turn continues to function throughout more than 1.6 km (1 miles).
  • Check the battery (Check Battery) - the Message informs the driver on an aberration of output tension of the battery and is highlighted in case of lowering of tension lower than 11.5 In or its exit for extreme value in 16 Century. From the screen make necessary corrections for removal of the message.
  • Lowering of level of liquid of washing of glasses (Washer Fluid Low) - For removal of this message from the screen add necessary amount of the washing liquid in the tank of system and include on new ignition.
  • Lowering of level of cooling liquid of the engine (Coolant Level Low) - Add the required amount of liquid in a broad tank and repeatedly include ignition.

The information center of the car is equipped with the counter of the routine maintenance of a run remaining until performance of another procedures. The corresponding message (xxx Miles to Service) is highlighted every time at inclusion of ignition.

1 mile = 1.6 km.

Besides, the center reveals failures of sensors.

When the size of the remaining run specified in the message is equal to zero, it is necessary to start performance of another procedures of routine maintenance (see the Head Nastroyki and routine maintenance). To nullify the counter, once press the SELECT button, then squeeze out and hold pressed within not less than two seconds (at the included ignition) the SET button.

Display of the modes of the transfer case

The information center of the car provides display of the board of data on the chosen mode of the transfer case. The notice is transferred by highlighting of wheels on the outline drawing of the car in combination with turning on of the corresponding indicators similar described above for the graphic display of the mode of the transfer case. In case of the choice of 2WD no indicators light up.

Hours/calendar of information center

On a board also two buttons of management (SELECT and SET) are provided. The first of them is intended for installation of the current time / date. If the power supply from the module was disconnected, indications on a board (time, date) at inclusion of ignition begin to blink. In this case it is necessary to make updating of data.

Include ignition (turn a key in position of ON) and make sure that on an information display time and date are highlighted.

Press the SET button and hold it pressed until figures of indications of hours (HOUR) on the screen do not begin to blink. Then release the button.

As short pressing of the SET button choose the correct hour indication of the current time (for bystry "rewind" of the counter hold the button of pressed).

By a nazhimaniye of the SELECT button pass to installation of the following in the order of value (respectively, minutes, day of the week, month and number). Control of parameters is made besides by means of the SET button.

For entering of new data in memory of the center press the SELECT button.

Control of measuring scales of information center

Indications of an information display can be issued both in metric system of units, and in accepted in the USA, Great Britain and some other (mainly agnloyazychny) the countries. Switching of the center to habitual measuring system is made by means of the US/M button on the top console of the car.

For control of measuring scales of the center press the SET button on the panel of an information display and, holding it it is pressed, include ignition (having turned a key in position of ON). On the screen of a board the name of the language of messages chosen in time to the last control will be highlighted. For highlighting of the following on a lock from the languages brought in memory of the center use the SELECT button. Confirm with pressing of the SET button the made choice.

After completion of the choice of language of messages the center will switch an information field of the screen to control of a timeline (12 hours or 24 hours) - the choice is carried out besides by the SELECT button and is confirmed by pressing of the SET button.

After a timeline control of a scale of counting of the routine maintenance of a run remaining before performance of another procedures is made. The choice of a step is carried out by the SELECT button. At will it is possible to adjust the center so that the message was given for any number of miles/km from 2 000/3 000 to 7 500/12 000 with a step to 500 miles / 1 000 km. Fix the made choice by means of the SET button.

The combined understeering switch

Indexes of turns

Inclusion of indexes of turns is made by movement of the lever of the combined understeering switch located at the left on a steering column in the vertical plane. At lever shift indexes of the right turn, down, respectively, - left join up. Functioning of indexes is duplicated by control lamps on an instrument guard of the car. The control lamp of the corresponding turn continues to blink in unison with the index during the whole time of inclusion of the last. If any of control lamps joins in the mode of a constant luminescence, or than the second begins to blink with twice bigger frequency, check a condition of lamps in blocks of indexes. If one of control lamps does not work at inclusion of the corresponding index at all, check its condition, and also a condition of a safety lock of this electric chain.

Temporary switching of light of head headlights
Inclusion of indexes of turns.

To switch head headlights from the mode of passing beam to the mode distant (or on the contrary), just pull on yourself the lever of the combined understeering switch.

Alarm system head headlights during daylight hours

To beep light to the driver of other vehicle during daylight hours when head headlights are switched off, besides it is necessary to pull on itself the lever of the understeering switch. At the same time driving beam of head headlights will be turned on and will continue to burn until the lever is not released.

Management of cleaners and washers of a windshield

Management of cleaners and washers of glass is made also by means of the combined understeering switch. The choice of the high-speed mode of functioning of screen wipers is made by turn of the handle on the end of the lever of the switch in the relevant provision. Inclusion of washers is made by squeezing of the button at a switch lever handle end face.
Inclusion of washers of a windshield.

Sudden loss of transparency of a windshield can lead to loss of control of driving and hit in an emergency! To avoid frosting in frosty weather before starting glass washing, warm up it by an obduv hot air of a heater.


In cold weather before suppressing the engine do not forget to switch off screen wipers, watching at the same time that they came back to the parking situation. If not switched off brushes freeze to glass, then at start of the engine they can be damaged.

The switch allows to include screen wipers in the interval mode of functioning with the choice convenient delay time between cycles. In order that the delay was maximum, turn the handle on the end of the lever of the understeering switch to the upper bound of range of the choice of time of a delay (see an insert on an illustration above). As approaching the mark LO duration of pauses is reduced up to transition to the mode of continuous functioning. The maximum time of a delay makes 20 sec., minimum - 2 seconds.

For inclusion of washers of glass press and hold the lever handle pressed the button on the end. Squeezing of the button at the screen wipers included into the interval mode of functioning brings cleaners will continue to work within several more seconds after its otpuskaniye, then will return to the mode of originally chosen delay. If to press the button inclusions of washers of glass at the switched-off screen wipers, there will be an automatic operation of the last. After an otpuskaniye of the button of a brush will make still full three cycles of purification of glass, then will return to parking situation.

Switch of management of functioning of a cleaner/washer of back glass of the car

The 3-position polzunkovy switch located control panels more to the right of a steering column is intended for management of functioning of a cleaner/washer of glass of a door of a back of the car. Activation of a screen wiper is made by the translation a switch rychazhka in situation DELAY or ON. For washing flew down enough to wring out a rychazhok inside in any of three of its provisions. The pump of a washer will continue to function until the button is not released. The cleaner at the same time is also automatically activated. After a button otpuskaniye the brush of a cleaner will make three more full cycles then it itself will return to parking situation.
Switch of management of a cleaner/washer of back glass.

If to switch off ignition at the working cleaner of back glass, its brush before a stop will automatically return to parking situation. At the same time at start of the engine the brush will not continue the movement if not to return the switch at first to position of OFF.

On the models equipped with folding glass of a door of a back an electric chain of a screen wiper automatically it is broken off at the time of opening of such glass.

Switch of a heater of back glass

In order to avoid damage of threads of a heating element of a heater of back glass, use only soft rags for its rubbing and show the corresponding care. Try not to touch glass from within salon with firm objects!

On the same panel, directly under the switch of management of a back screen wiper / washer the switch of a heater of back glass is located. At inclusion of a heater under the button of the switch the control lamp of yellow color lights up. To switch off a heater, press the button repeatedly.

The heater of back glass is equipped with the timer making its automatic shutdown about ten minutes of continuous functioning later. Such precautionary measure allows to avoid a battery discharge in case of a heater zabyvaniye included (the heating element is a power-intensive consumer of the electric power). In need of resumption of work of a heater press the switch button repeatedly about five minutes later. In order to avoid replanting of the battery use a heater only at the switched-on engine.

At the corresponding complete set of the car along with a heater (at the command of the same switch) there is an activation of heaters of external rear-view mirrors.

Switches of management of external lighting / illumination of the dashboard

Do not stick together drivers of oncoming vehicles fog lights - intensity of illumination of their radiation is rather big to be dangerous!

The rotary handle on the panel of switches located to the left of a steering column serves for control of external lighting/alarm fixtures. On the head and fog lights equipped with automatic equipment of inclusion models the handle has five stationary provisions. For activation of automatic equipment turn the handle from position of OFF counterclockwise. The turn of the handle on one division from position of OFF clockwise leads to inclusion of running/parking fires. Turn of the handle on one division running fires join in combination with head headlights. The further turn clockwise carries out activation of fog lights which inclusion is followed by initiation of a yellow control lamp.
The handle of management of external lighting / illumination of devices and potentiometer of intensity of illumination (the toddler under the handle).

Functioning of fog lights becomes possible only on condition of inclusion of passing beam of head headlights. At transfer of the last to the mode of driving beam fog lights are automatically disconnected.

Automatic equipment of activation of head headlights (additional complete set of the car)

As it was already noted above, for turning on of automatic equipment it is necessary to turn the handle of management of external lighting from position of OFF counterclockwise.

The device has two distinctive features. At the included ignition (a key in situation ON/RUN) and the AUTO handle turned in situation, head headlights of the car depending on intensity of illumination of the area. The second feature of the device is providing a delay of shutdown of external lighting fixtures of the car at switching off of ignition.

Management of intensity of illumination of devices

The Polzunkovy potentiometer of intensity of illumination of the dashboard is located directly under the handle of control of external lighting fixtures on the panel of switches to the left of a steering column (see an illustration above). In order to avoid the visual hindrances created by dashboard illumination, intensity of a fluorescent luminescence of displays at inclusion of head headlights or parking fires automatically decreases during daylight hours to a minimum. Intensity of illumination of monitors is subject to smooth adjustment from zero to some maximum value by movement a rychazhka of a polzunkovy potentiometer from left to right. To the maximum value of intensity of illumination there corresponds situation a rychazhka opposite to vertical risks on a symbolical scale under a potentiometer frame. When moving a rychazhka also all lamps of illumination of interior in public of the car still more to the right join.

Inclusion of day running fires (only Canadian models)

At turn of the ignition key in situation ON/RUN there is an inclusion of head headlights of the car which continue to burn until ignition is switched off or the parking brake is cocked. Driving beam will work at the same time only on half intensity of illumination.

Turning on of the alarm system

The button of turning on of the alarm system is located from above on a steering column. At activation of the alarm system forward and back indexes of both turns begin to blink at the same time. The control lamp in the button also begins to blink. Switching off of the alarm system is made by repeated pressing the same buttons.
Turning on of the alarm system.

Long use of the alarm system at the switched-off engine can lead to replanting of the rechargeable battery.

Management of an inclination of a steering column

Do not make adjustment of an inclination of a steering column during the movement at all - it is very dangerous!

For simplification of access to salon, and also for ensuring the maximum comfort to the driver the car is equipped with a steering column of the inclined type. The control lever is located the provision of a column at the left on its casing (behind the combined understeering switch).
Control lever inclination of a steering column.

Pull a control lever a column inclination on yourself and move a steering wheel to a comfortable position (down or up). Blocking of a column in new situation happens automatically at a lever otpuskaniye.

Control panel of systems of heating, ventilation and air conditioning

Switches of management of systems of heating, ventilation and air conditioning of salon are integrated on the general panel and are executed in the form of rotary handles. By a manipulation these handles it is possible to achieve comfortable climatic conditions in interior of the car.
Control panel of systems of heating, ventilation and air conditioning.

Rotation of the left handle allows to choose the required high-speed mode of rotation of the fan of a heater (range from LO (small speed) to HI (high speed)).

The electric motor of a krylchatka of the fan remains powered until the system is not disconnected by turn of the average handle in position of OFF, or ignition will not be switched off yet.

Smooth installation by air temperature in salon is carried out by turn clockwise of the right handle of the control panel. What stronger turned the handle, especially heated air will move in interior of the car.

At turn to the handle extreme right situation joins the mode of the closed air recirculation providing the maximum speed of warming up of air.

The choice of the direction of distribution of the air forced in salon is carried out by means of the average handle of the control panel. The handle has six stationary provisions:

  • Position of OFF (1 - see an illustration above) serves for shutdown of giving of food on an electric motor of the fan of a heater and an overshoot of giving in salon of external air.
  • At transfer of the handle to situation (2) the air forced in salon moves through the ventilating nozzles located on the dashboard.
  • The choice of situation (3) allows to carry out distribution of air in two directions - through nozzles of the dashboard and a nozzle of foot wells.
  • In situation (4) air moves in salon only through ventilating nozzles of foot wells from under the dashboard (forward wells) and from under front seats (back wells).
  • Situation (5) serves for distribution of the forced air between nozzles of foot wells (forward and back) and nozzles of an obduv of a windshield.
  • Extreme right situation (6) allows to direct air only on having blown in a windshield for the purpose of bystry warming up in it in cold or damp weather.

For economy of fuel consumption try not to include the sixth mode of the direction of distribution of air without need.

For turning on of the conditioner of air squeeze out the button located between average and right handles of the control panel then by means of all three achieve optimum climatic conditions in salon.

Nozzles of an obduv of side glasses

On all cars of the Grand Cherokee brand the possibility of an obduv of glasses of both forward doors is provided. Air sleeves of system of heating/ventilation are connected to the nozzles located on each side dashboards. Air supply in these nozzles is carried out at the choice of the modes (3) and (4).

The control panel of system of automatic adjustment of air temperature in salon (an additional complete set)

The automatic mode of maintenance of the set temperature

The system of automatic adjustment of temperature (automatic telephone exchange) constantly supports climatic conditions in interior of the car at optimum level (at the choice of the operator). Functioning of system is based on the basis of signals of several information sensors. At the same time the sensor of temperature of internal air is built in in the dashboard to the right of the control panel of automatic telephone exchange. The sensor of temperature of external air is fixed behind a radiator lattice on the car front panel. It is provided also the sunlight sensor inserted into a forward part of the dashboard close snuffled an obduva of a windshield.

The system of automatic telephone exchange differs in extreme simplicity in management. Begin with installation of the average rotary handle in position of AUTO. Then by rotation of the right handle choose value of temperature (°F/°C) which you would like to support in salon - value of temperature will be highlighted on the screen of the display located in the right top corner of the control panel and will be automatically maintained by system.

The display can be ready for indication of temperature both in degrees Fahrenheit (°F), and in degrees Celsius (°C) - the choice is carried out by means of the US/M button on the top console of the car.


The control panel of system of automatic adjustment of air temperature in salon.

The left handle of the panel is intended for adjustment of the high-speed mode of rotation of a krylchatka of the fan of a heater. In position of AUTO the choice only between the modes of small (LO) and high (HI) rotation speeds is possible. After the system is customized on a certain temperature condition any more installations it is not required - temperature will be maintained in salon at the set level automatically.

Manual adjustment of climatic conditions in salon

At desire the control panel of automatic telephone exchange can use for manual adjustment of climatic conditions in salon. Bring the left and average handles of the panel out of provisions of AUTO and choose the desirable modes of speed of rotation of the fan and the direction of distribution of air with their help (the choice is carried out as well as in case of systems of heating/ventilation of usual type.

Inclusion To/in perhaps only in the manual mode of functioning of system by means of the А/С button on the control panel.

If air outside salon has a fetid odor or is strongly dusty/smoke-filled the possibility of inclusion of the mode of the closed recirculation of internal air is provided. Press the RECIRC button (besides only in the manual mode of functioning of system). This mode allows to cool also quickly air in salon. When squeezing the RECIRC and A/S buttons on the display of the control panel the corresponding symbols are highlighted. Both modes can be chosen both in an individual order, and in combination with other installations. Repeated squeezing of buttons leads to shutdown of the modes.

In the automatic mode of functioning of system of automatic telephone exchange turning on of the fan of a heater at cold start of the engine is made with a certain delay that allows to avoid empty circulation of cold air on salon. At inclusion of the mode of an obduv of windows of beliefs it will be started immediately. It is also possible to start it, having brought the handle out of position of AUTO.

Removal of condensate from glasses

In rainy, damp weather of glass of the car tend to fogging from the inside. For removal of condensate it is necessary to choose the direction of distribution of the air given to salon on dashboard nozzles (2 - see the illustrations Control Panel of Systems of Heating, ventilation and air conditioning and the Control panel of system of automatic adjustment of air temperature in salon), pressing of the А/С button to turn on the conditioner of air and to set one of high-speed operating modes of the fan. Develop zhalyuziyny lattices of side snuffled dashboards so that that air moved on glasses of forward doors. From a windshield condensate can be quickly removed by the choice of the mode of its obduv (6 - see the illustrations Control Panel of Systems of Heating, ventilation and air conditioning and the Control panel of system of automatic adjustment of air temperature in salon).

Does not follow for a long time individually (out of a combination with To/in) to include the RECIRC mode (see the illustration Control Panel of System of Automatic Adjustment of Air Temperature in salon) as it can lead to internal fogging of glasses.

The Grand Cherokee cars are equipped with also door nozzles of an obduv of side glasses. Air sleeves are connected to a control system of climate and provide having blown in side glasses in provisions 3 and 4 (see the illustrations Control Panel of Systems of Heating, ventilation and air conditioning and the Control panel of system of automatic adjustment of air temperature in salon) in handles of the choice of the direction of distribution of an air stream.

Electronic clock

Hours are built in in the radio receiver control panel. The liquid crystal indicator highlights on the screen the current hour and minutes constantly at the ignition key turned in position of ON or ASSORTMENT.

At the switched-off ignition (a key in position of OFF) or when the screen of the display is used for indication of the chosen radio frequency, time continues to be counted automatically.

The procedure of installation of time is described below in the following subsection devoted to the Chrysler audio systems.

Audio systems of a company complete set Chrysler

Instructions for use the stereoradio tape recorder with AM/FM the tuner

Food on the radio tape recorder moves via the ignition switch therefore use of it becomes possible only in provisions of ON or ASS of a key.


For successful reproduction of tape recordings in frosty weather right after initial start of the engine it is necessary to wait some time necessary for warming up of components of the tape drive mechanism. Sometimes bad quality of reproduction is connected with a condition of a film - try to replace the cartridge, having filled instead of suspicious obviously serviceable.


Cleaning and podmagnichivaniye of the reproducing heads of a player have to be made at least twice a year.

Appearance of the control panel of the radio tape recorder is presented on an accompanying illustration.
The radio tape recorder control panel with AM/FM the tuner.

Inclusion of food is carried out by turn clockwise of the VOL/POWER handle at the left above on the radio tape recorder control panel. Further rotation of this handle in the same direction leads to increase in loudness of sounding.

Control of sound frequencies is exercised by means of polzunkovy potentiometers of BASS and TREB. Shift of rychazhok increases level according to low up or high frequencies, their lowering down - reduces level.

The choice of the listened radio frequency is carried out by means of the TUNE handle. The handle turns clicks with a step of change of a radio frequency to 10 kHz in the AM mode and in 2 MHz in the FM mode.

Balancing of distribution of a sound between the right and left loudspeakers is carried out by means of the ring located under the VOL/POWER handle with a rychazhok marked on the radio tape recorder control panel of the inscription BAL and equipped with a symbolical scale with letters of L and R (To the Left/to the right).

The SEEK key is intended for search of busy frequencies of the corresponding range of broadcasting of increase, or decrease. The radio receiver will continue to reproduce new frequency so far the choice will not be changed. If to hold a key pressed continuously, transition will be carried out without stops.

The choice of range of frequencies of broadcasting is carried out by means of the AM/FM button in the top part of the control panel. Each pressing of the button leads to switching of range. The made choice is reflected in the liquid-crystal display by highlighting of the corresponding tag more to the right of the field of indication of frequency. If the chosen radio station carries out stereobroadcasting, also the mark ST will in addition be highlighted.

In the mode of reproduction of FM range the radio receiver carries out an automatic zaglushivaniye of intermediate waves with the weak level of reproduction or with the high level of noise. To reproduce such frequency voluntarily, adjust on it the tuner and press the SEL button.

To bring the fallen in love radio channel in memory of the radio receiver, press the SET button - on the screen of the display the inscription SET 1 will be highlighted. Choose one of press buttons in the lower part of the control panel and once press it. Now at a nazhimaniye on this button the chosen radio frequency will be reproduced.

If the press button is pressed with a delay more than 5 seconds after push-up of the SET button, the chosen frequency will not be brought in memory of the radio receiver, though will continue to be reproduced.

About two radio channels in both ranges can be appropriated to each of five press buttons (2 from FM and 2 from AM). To use the button for reproduction of the second radio frequency during control press the SET button twice - on the screen of the display the message of SET 2 has to be highlighted. Then press the chosen press button. Now, to reproduce the first radio frequency appropriated to the button it is necessary to press it once, for reproduction of the second frequency - two. Thus, as press buttons five, all in memory of the radio receiver 10 stations from the range of FM and 10 - from AM range can be brought.

To switch the mode of functioning of the radio tape recorder (radio/tape recorder) press the VOL/POWER button handle (on the right under it there is SEL-PUSH mark.

Upon transition to reproduction of tape recordings the system of suppression of noise Dolby automatically joins. At the request of the operator the system can be disconnected manually for what after introduction of a film in a kassetopriyemnik, press the button 1/00 - on the screen of the display the inscription NR more to the right of the field of indication of radio frequencies/hours has to go out. Reactivation of system is made automatically at each insertion of a film in a kassetopriyemnik.

The EJT button of the control panel of the radio tape recorder is intended for extraction of the cartridge from a kassetopriyemnik. The radio receiver tuner at the same time can be both is switched on, and switched off. If, without taking the cartridge from a kassetopriyemnik to switch off radio/ignition, clamping and a magnetic head of a player will be taken automatically away from a film.

Two buttons located more to the right of a kassetopriyemnik with the image of double arrows are intended for the accelerated rewind of a magnetic tape forward or back. At the same time rewind is made by a nazhimaniye on that forward from buttons which direction of arrows coincides with the direction of scrolling of a magnetic tape reflected in the display screen at present. For a film otmatyvaniye press respectively the second button back. When pressing the button is blocked and rewind continues until the film does not come to an end and will not switch to reproduction in an opposite direction. To suspend rewind, press the second of buttons.

At desire to replace the direction of reproduction of a film press once the VOL/POWER button handle - the arrow highlighted on the screen of the display will change the direction to opposite.

In the course of reproduction of tape recording on the main information field of the display the current time will continue to be highlighted, slightly symbols of the direction of rotation of a film and activation of system of suppression of noise of Dolby more to the right will be placed. Reinstallation of hours can be made without shutdown of a player.

Instructions for use the stereoradio tape recorder with AM/FM the tuner and a graphic equalizer

Food on the radio tape recorder moves via the ignition switch therefore use of it becomes possible only in provisions of ON or ASS of a key.


It is necessary to begin acquaintance to the radio tape recorder with installation of rychazhok of management of an equalizer in shown on an illustration 3.102 provisions. Loudspeakers have to be balanced evenly.


For successful reproduction of tape recordings in frosty weather right after initial start of the engine it is necessary to wait some time necessary for warming up of components of the tape drive mechanism. Sometimes bad quality of reproduction is connected with a condition of a film - try to replace the cartridge, having filled instead of suspicious obviously serviceable.

Appearance of the control panel of the radio tape recorder is presented on an illustration.

The radio tape recorder control panel with AM/FM the tuner and a graphic equalizer.

Inclusion of power supply of the radio tape recorder is carried out by turn clockwise of the VOL/OFF handle. Further rotation of the handle leads to increase in loudness of sounding of system.

The control unit of a graphic equalizer consists of 5 polzunkovy potentiometers which average provision of rychazhok is noted by dredging in guides. The rychazhka up or down leads the translation respectively to increase or decrease in level of the corrected frequency (it is specified under each of rychazhok).

At the switched-on radio receiver the system of dynamic suppression of noise is constantly involved. The system of suppression of noise Dolby is activated automatically at inclusion of a player, however can be disconnected at the request of the operator by a nazhimaniye on the DOLBY button - on the screen of the display the inscription NR (Dolby) has to go out. Reactivation of system is made at each introduction of the cartridge in a kassetopriyemnik.

Switching of radio frequencies (in both directions) is made by means of the TUNE key. Switching of frequencies is made continuously until the key is released with reflection of process on the display screen.

Balancing of distribution of sounding between four columns is made by means of the turbo regulator located in the right bottom corner of the control panel of the radio tape recorder.

Switching of range of broadcasting is made by means of the AM/FM button. The chosen range is reflected in the display screen near the field of indication of frequency. If the radio station working at the chosen wave makes stereobroadcasting, near a symbol of range of frequencies with some delay ST letters will be highlighted.

The radio receiver allows to carry out reception of the radio stations of stereobroadcasting of the Motorola C-Quam® trademark working in AM range - at reproduction of such channels on the display screen ST symbol is also highlighted.

To bring the fallen in love radio channel in memory of the radio receiver, press the SET button - on the screen of the display the inscription SET 1 will be highlighted. Choose one of press buttons in the lower part of the control panel and once press it. Now at a nazhimaniye on this button the chosen radio frequency will be reproduced.

If the press button is pressed with a delay more than 5 seconds after push-up of the SET button, the chosen frequency will not be brought in memory of the radio receiver, though will continue to be reproduced.

About two radio channels in both ranges can be appropriated to each of five press buttons (2 from FM and 2 from AM). To use the button for reproduction of the second radio frequency during control press the SET button twice - on the screen of the display the message of SET 2 has to be highlighted. Then press the chosen press button. Now, to reproduce the first radio frequency appropriated to the button it is necessary to press it once, for reproduction of the second frequency - two. Thus, as press buttons five, all in memory of the radio receiver 10 stations from the range of FM and 10 - from AM range can be brought.

The SEEK key is intended for search of busy frequencies of the corresponding range of broadcasting of increase, or decrease. The radio receiver will continue to reproduce new frequency so far the choice will not be changed. If to hold a key pressed continuously, transition will be carried out without stops.

Nazhimany on the SCAN button carries out transition from one busy frequency of the chosen range to another. At an entrance to the search mode on the screen of the display MS letters are highlighted. At the same time the tuner carries out a 5-second delay on each of revealed to frequency. For an exit from the mode it is enough to press any of the following buttons: SET, SEEK, TIME/PROG, SCAN or TUNE. At a nazhimaniye on the AM/FM button search will continue already in other range.

Introduction of the cartridge in a kassetopriyemnik of a player has to be made without any effort. Carefully fill the cartridge, having deployed it the working party to the right and the mechanism of a kassetopriyemnik will smoothly involve it in a player.

The accelerated rewind of a film is made by a nazhimaniye on the half of the TAPE key located in the right top corner of the control panel marked with letters FF forward. On the screen of the display the directed double arrow will be highlighted respectively. Rewind will continue until the key is not pressed repeatedly, or the film will not come to an end yet and reproduction of its reverse side will begin. Rewind of a film is carried out similarly at the expense of a nazhimaniye on the half of a key marked with letters RW back.

Use of the SEEK key in the mode of reproduction of the tape recorder joins search of the beginning current or following in the order of record. On the screen of the display MS letters are highlighted. If to press the lower half of a key in the first five seconds of reproduction of a thing, transition to the beginning of the previous record on a film will be carried out. At reproduction of a film in the programming mode function of search is turned off automatically.

Change of the direction of rotation (the party of reproduction) of a film is made by a short nazhimaniye on the TIME-PROGRAM button. The shooter, specifying the direction of reproduction on the display screen also it will be developed on 180 °.

Extraction of the cartridge from a kassetopriyemnik is carried out by means of the EJT button. Extraction can be made without preliminary stop of the mode of reproduction of record.

At installation in a kassetopriyemnik of a standard film on 70 mS, a player will automatically make alignments of dynamic range of frequencies, and on the screen of the display the symbol 70 will be highlighted.

Otpuskany a clamping roller and withdrawal of a magnetic head are made automatically at switching off of the radio tape recorder or ignition that allows to protect the film left in a kassetopriyemnik from casual damage. At inclusion of food the roller and a head come back into position.

Stereosystem of listening of radio channels of AM-FM of range and compact disks with a graphic equalizer

Food on the radio tape recorder moves via the ignition switch therefore use of it becomes possible only in provisions of ON or ASS of a key.


At the movement on an uneven paving reproduction from a compact disk can automatically stop. The same can occur in case of use of a low-quality disk.

Appearance of the control panel of a stereosystem is presented on an illustration.

AM/FM stereosystem control panel - CD.

To bring the fallen in love radio channel in memory of the radio receiver, press the SET button - on the screen of the display the inscription SET 1 will be highlighted. Choose one of press buttons in the lower part of the control panel and once press it. Now at a nazhimaniye on this button the chosen radio frequency will be reproduced.

If the press button is pressed with a delay more than 5 seconds after push-up of the SET button, the chosen frequency will not be brought in memory of the radio receiver, though will continue to be reproduced.

About two radio channels in both ranges can be appropriated to each of five press buttons (2 from FM and 2 from AM). To use the button for reproduction of the second radio frequency during control press the SET button twice - on the screen of the display the message of SET 2 has to be highlighted. Then press the chosen press button. Now, to reproduce the first radio frequency appropriated to the button it is necessary to press it once, for reproduction of the second frequency - two. Thus, as press buttons five, all in memory of the radio receiver 10 stations from the range of FM and 10 - from AM range can be brought.

Inclusion of power supply of the radio tape recorder is carried out by turn clockwise of the VOL/OFF handle. Further rotation of the handle leads to increase in loudness of sounding of system.

The SEEK key is intended for search of busy frequencies of the corresponding range of broadcasting of increase, or decrease. The radio receiver will continue to reproduce new frequency so far the choice will not be changed. If to hold a key pressed continuously, transition will be carried out without stops.

Switching of range of broadcasting is made by means of the AM/FM button. The chosen range is reflected in the display screen near the field of indication of frequency. If the radio station working at the chosen wave makes stereobroadcasting, near a symbol of range of frequencies with some delay ST letters will be highlighted.

Nazhimaniye on the AM/FM button in the course of reproduction of records from a compact disk on the screen of the display appears the message of PAUSE (Pause), and the system switches in the broadcasting mode.

Nazhimany on the SCAN button carries out transition from one busy frequency of the chosen range to another. At an entrance to the search mode on the screen of the display SCAN letters are highlighted. At the same time the tuner carries out a 5-second delay on each of revealed to frequency. At desire to stop at one of stations press the button repeatedly. Otherwise search will continue.

The control unit of a graphic equalizer consists of 5 polzunkovy potentiometers which average provision of rychazhok is noted by dredging in guides. The rychazhka up or down leads the translation respectively to increase or decrease in level of the corrected frequency (it is specified under each of rychazhok).

Switching of radio frequencies (in both directions) is made by means of the TUNE key. Switching of frequencies is made continuously until the key is released with reflection of process on the display screen.

Within the first two seconds of keeping of the key pressed switching will happen to the small speed which then will sharply increase.

Nazhimaniye on the TIME button in the mode of reception of radio channels leads to temporary highlighting on the display of the current time and date.

Balancing of distribution of sounding between four columns is made by means of the turbo regulator located in the right bottom corner of the control panel of the radio tape recorder.

To start reproduction of records from a compact disk it is necessary to turn the ignition key in position of ON or ASS, and also to include system food by turn of the VOL/OFF handle.

Introduction of a disk to a reception nest of a player, as well as its extraction, can be carried out at the switched-off radio receiver.

If to insert a disk at the included ignition and the switched-off radio receiver, on the screen of the display the message of PAUSE (Pause) then the indicator will switch to display of time/date will be highlighted.

At inclusion of food by turn of the VOL/OFF handle the system will switch in the reproduction mode from a compact disk which will begin at once after its introduction to a reception nest of a player. Automatic reproduction always begins with the first record on a disk.

The PAUSE/PLAY button is intended for suspension of reproduction from a compact disk (on the screen of the display the inscription PAUSE is highlighted). After removal of a pause reproduction will begin with that moment on which it was interrupted. If the disk was not completely entered into a reception nest of a player, then at a nazhimaniye of this button there will be its automatic retraction and the beginning of reproduction of the first record.

Pressing of the SEEK key in the reproduction mode from a compact disk leads to transition to the beginning of the current record or transition to following one after another.

The FF/Disc/FR key is intended for bystry scrolling of signing up on a compact disk in this or that party.

At a single nazhimaniye on the SCAN button in the CD player mode on the screen of the display the inscription of the same contents will be highlighted. In the button the control lamp will light up. At the same time the player will begin to reproduce serially the beginning (for 10 seconds) each of the records which are present at a disk. An exit from the mode of acquaintance is made by repeated pressing of the button.

The EJECT button is intended for unloading of a disk from a reception nest of a player. The system at the same time automatically passes into the radio reception mode. If the disk is not taken from a reception nest within 15 seconds after unloading, there will be its return retraction to switching of system in the PAUSE mode.

Extraction of a disk is possible also at the switched-off radio receiver.

The TIME button as well as in the mode of reproduction of radio frequencies it is intended for temporary highlighting of the current time and date.

If the laser device of a player is incapable to reproduce information which is written down on a compact disk, on the screen of the display the message of ERR (Mistake) will appear. Treat jolting of the car at movement along the uneven road number of the reasons leading to such refusals, the wrong orientation of a disk in a reception nest of a player, mechanical defect of a disk, and also formation of condensate on optical components of the reader.

Reproduction of record can be suspended in case of a device overheat. at the same time on the display screen in a delay about 20 ÷ of 30 seconds there will be a message of CD HOT, and the system will switch in the radio reception mode. On the screen the inscription PAUSE will be highlighted.

When excessively low temperature of the device leads to errors of reading from a disk, on the screen of the display the inscription COLD is highlighted. The device switches to radio reception.

Ware box of the dashboard

The ware box is located in the right part of the dashboard of the car. The box has individual lighting. The lamp continues to burn all the time while the cover of a box remains open - pay attention to density of closing of a cover in order to avoid a discharge of the onboard battery.

Lighter and forward ashtray

In order to avoid children's overindulgence the lighter functions only at the included ignition (a key in position of ON). To heat a heating element of the lighter it it is necessary to drown in the nest. On reaching sufficient temperature the working element of the lighter is automatically pushed out from a nest in extreme situation.

In order to avoid a lighter exit out of operation do not hold it in the drowned situation violently.

The forward ashtray is located in the central part of the dashboard. For extraction press the lever down and pull the pallet an ashtray outside from the nest.
Forward ashtray.

Equipment of salon

Sun-protection peaks

Peaks are located over a windshield and serve for protection of eyes of the driver and the forward passenger against direct sunshine. At side lighting the peak can be appropriately developed. From the inside of a peak there is a mirror. The mirror is covered with a cover when which lifting illumination automatically joins. Intensity of illumination is regulated by a potentiometer of polzunkovy type at the request of the user.
The Polzunkovy regulator of intensity of illumination of the mirror located in a sun-protection peak.

Top console

The top console is located along the central part of a forward half of a ceiling upholstery of salon and is used for placement of some service equipment.

Lamp of illumination of salon

In front and behind in the top console the lamps intended for illumination of salon and a possibility of reading are built in. Each lamp consists of two lamps which lamps join automatically when opening any of car doors (including a back door). Also the possibility of turning on of lamps by movement a switch rychazhka is provided in extreme right situation.

Lamps for reading join by a nazhimaniye on a concave surface of the corresponding lens. For switching off of a lamp press a lens repeatedly.
The forward lamp of the top console (back looks similarly).

Before leaving interior of the car, do not forget to switch off lamps for reading.

Compartment for placement of the remote control (DU) opening and closing of gate of a garage

The compartment under installation of the DU panel is located in a middle part of the top console. Activation of the panel is made by a nazhimaniye on a compartment cover. For opening of a cover firmly press its rear edge and pull down.
Compartment for placement of the DU panel garage gate.

To install the DU panel in a compartment of the top console remove a protective film from the sticky party of a loopy and hook clamp (it is delivered complete with the console) and attach the last to the DU panel.

Now measure thickness of the panel and calculate the necessary thickness of adjusting plugs, proceeding from the following conditions: At a thickness of panel from 9.5 to 22 mm three plugs are required.
Thickness of the panel, mm

Number of plugs

9.5 ÷ 22.2

2

19.0 ÷ 32.0

1

32.0 ÷ 35

0

Adjusting plugs are fixed on the back party of a cover of a compartment - take the required number of plugs and pull them on the provided guide. Insert the panel into a compartment and place it so that the OPEN button was located (to Open) on one axis with plugs.

Close a compartment cover, having tracked that the clamp was latched. Now for operation of the panel will be to press a compartment cover enough.

Compartment for storage of sunglasses

The compartment is located in a back part of the console and equipped with a clamp for fastening of sunglasses in it. For opening of a cover firmly press its part designated by a special mark. The cover at a nazhimaniye has to turn over slowly.

Device of reception of signals of the DU panel of the uniform lock

For operation of the uniform lock it is necessary to approach the car with any of the parties, to direct a DU panel radiator approximately to the top console of the car and to press the button of management. Activators have to make respectively unlocking or locking of locks of doors.

Compass block / мини-процессора route data

The device is also located in the top console of the car and delivers to the driver information on temperature of external air, an arrangement of the countries of light and characteristics of a route.

Block of the compass/index of temperature

On the screen of the display of the device value of temperature of external air and the direction of the movement of the car concerning the countries of light (one of eight) are highlighted.

Indications of the mini-processor of route data

The device is equipped with the display on which screen the following parameters are highlighted:

  • The size of the distance (ODO) passed along a route;
  • Average fuel consumption from the moment of the last reinstallation of the processor (AVG ECO);
  • Fuel consumption at the moment (ESO);
  • Settlement distance which the car can pass to full emptying of the fuel tank (DTE).
  • Calculation is made proceeding from indications of a speedometer in the last several minutes;
  • Time of stay of the ignition key in position of ON from the moment of the last reinstallation of the processor (ET).
Display and control panel of the mini-processor of route data.

On the control panel of the processor the button of step-by-step scrolling of all route parameters (STEP), plus indications of the thermometer and a compass is provided.

By means of the US/M button switching of systems of measurement of indications of the processor is made (American/metric).

For reinstallation of the processor press at the same time the US/M and STEP buttons and hold them pressed within at least two seconds. On the display the message confirming completion of reinstallation (RESET) has to be highlighted.

Automatic calibration of a compass

The compass is equipped with the device of automatic calibration that allows to avoid need of performance of this task manually. At the beginning the compass can issue to operation of the new car the unstable indications which are followed by highlighting of the message of CAL (Calibration) on the display screen. After commission of three full turns (on 360 °) the car on the area, free from large metal objects, the message of CAL has to disappear from the screen, and compass readings to be stabilized.

If indications are unstable, but the message of CAL on the screen is not given, it is necessary to make manual calibration of a compass. Include ignition and switch the display to the mode of demonstration of parameters of the compass/thermometer. Within 10 seconds hold pressed the US/M and STEP buttons - on the screen the message of CAL has to be highlighted. Release buttons and make on the car three full turns (on 360 °) on the area, free from large metal-containing objects. The message of CAL has to disappear from the screen. Compass readings have to be stabilized.

The deviation between the direction on magnetic and geographical poles is called inducement. In some areas of the globe this deviation can reach rather big size in order that the compass gave false testimonies. In this case it is necessary to make the corresponding adjustment.

Find the zone corresponding to the geographic location on the card of magnetic inducement (see an accompanying illustration). Include ignition, having turned a key in position of ON and switch the display to the mode of demonstration of parameters of the compass/thermometer. Within 5 seconds hold pressed the US/M and STEP buttons - on the screen the message of VAR (Inducement) and number of the last geographical zone brought in memory of the device has to be highlighted. By means of the US/M button change number on new, corresponding to the actual residence of the car. For entering of new data into the processor memory and return of system to the mode of normal functioning press the SET button.
Card of magnetic inducement.

Electrodriving top hatch (additional complete set)

The probability of receiving serious injuries during accident considerably increases at ejection of the driver or passenger via the open top hatch of the car! You watch that seat belts during the movement were constantly clasped.

Do not allow children to operate the electric drive of a cover of the top hatch independently! Do not lean out in the hatch during the movement of the car at all!


For wiping of glass of the top hatch use only the soft, not containing an abrasive rags.

The cover of the hatch can is lifted in any situation between completely closed and completely opened by states. The control panel is in the top mini-console of the car located closely to a windshield. For opening of the hatch take away the kulisny switch back. The glass cover of the hatch has to move in the cavity provided between the panel of a roof and a ceiling upholstery of salon. At the same time before a hatch aperture on a roof of the car the airreflector will rise. Closing of the hatch is made by a deviation a switch rychazhka forward (to a windshield). Hold the switch before full closing of the hatch.

Also ventilating provision of a cover of the hatch is provided - in a closed position of glass take away a rychazhok of the kulisny switch forward. Return of glass to a starting position is made by branch a rychazhka back.
The mini-console with the control panel of the electric drive of the top hatch (an additional complete set).

Moving and zadviganiye of a sun-protection blind is made manually without use of any electromechanical drive. Existence of such blind allows to maintain more comfortable temperature in salon, especially in the winter in a sunny weather.
Ventilating position of the top hatch.

Illumination of salon

Internally illumination of salon is provided with the lamps installed in the top console (see above subsection the Top console). Management of lamps is made for reading by a nazhimaniye on their lenses. Some models are in addition equipped with the lamps which are built in panels of an internal upholstery of forward doors under armrests.

Lighting of the luggage compartment

Inclusion of a lamp of lighting of the luggage compartment is made when opening a door of a back, or other door of the car. Also compulsory turning on of the lamp by means of the polzunkovy switch is possible. When all doors of the car except a door of a back are closed, shutdown of all internal lamps can be made by a nazhimaniye on a plafond of a lamp of lighting of the luggage compartment. The repeated nazhimaniye on a plafond resumes lighting.
Lamp of lighting of the luggage compartment.

The switch of lighting of the luggage compartment enters the working condition only upon completion of functioning of system of illumination of salon during landing time in the car.

Removable cover of the luggage compartment

To close the luggage compartment grasp a cover in the location of the central handle. Delay a cover for the spare wheel located in the luggage compartment. Insert manual arms of a cover into grooves in the panel of an internal upholstery of a door of a back. Existence of a cover does not prevent opening of a door of a back thanks to existence of the automatic returnable device.
The cover closing the luggage compartment of the car
(it is specified by an arrow).

Cargo grids of the luggage compartment

On the back side panel of an upholstery of the luggage compartment opposite to a spare wheel the pocket made of a grid in which if necessary there can be small objects is fixed. The additional grid of triangular shape is equipped with the hooks located on corners which it is possible at desire to cling for eyes on half of the luggage compartment for the purpose of fastening of various objects. The grid can be also fixed on a reverse side of a back of a back seat, or across a back doorway, forming the fenced closed space.
Grids for fastening and placement of objects in the luggage compartment.