Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- System of onboard electric equipment
   General information
   Diagnostics of malfunctions of electric equipment of the chassis - the general information
   Safety locks - the general information
   Fusible inserts - the general information
   Chain breakers (thermal relays) - the general information
   The relay - the general information
   Check of a state and replacement of the breaker of indexes of turn / alarm system
   Check of serviceability of functioning and replacement of the universal understeering switch
   Check of a state and replacement of the switch of the ignition/cylinder of the lock
   Check of serviceability of functioning of the switch of heating of glass of a door of a back
   Check of a state and repair of a heater of glass of a door of a back
   Replacement of lamps of head headlights
   Adjustment of provision of head block headlights
   Removal and installation of cases of head block headlights
   Replacement of lamps
   Removal and installation of switches of head headlights and screen wiper of a window of a door of a back
   Removal and installation of the radio tape recorder and loudspeakers
   Removal and installation of the antenna
   Check of functioning and replacement of the motor of screen wipers
   Removal and installation of a combination of devices
   Check of functioning and replacement of a horn
   Description of the principle of functioning and diagnostics of a control system of the speed (tempostat)
   Description of the principle of action and diagnostics of the electric drive of lowering lifting of glasses
   The principle of functioning and check of the central lock and system of opening of doors without key
   Principle of action and check of serviceability of the electric drive of change of provision of seats
   Principle of action and check of serviceability of the electric drive of mirrors back look
   Safety cushion - the general information
   Electric circuits - the general information
   Arrangement and purpose of the relay and safety locks
+ Governing bodies and methods of operation



Fusible inserts - the general information

Protection of some contours is carried out by inclusion in their electric chain of fusible inserts. Inserts are usually used for protection of the contours which are not equipped with safety locks such as ignition contour.

Fusible inserts on these models are similar to safety locks in the sense that an exit them out of operation (oplavleniye) easily is defined visually. Inserts equipped the block of distribution of the power (PDC) in a motive compartment (The section of the Relay - the general information).

For replacement of a fusible insert at first disconnect a negative wire from the battery. Take the burned-down insert and establish on its place new (can be acquired in dealer office or shop of automobile accessories). Before replacement of an insert surely try to define the reason of the overload which caused its exit out of operation.