Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- System of onboard electric equipment
   General information
   Diagnostics of malfunctions of electric equipment of the chassis - the general information
   Safety locks - the general information
   Fusible inserts - the general information
   Chain breakers (thermal relays) - the general information
   The relay - the general information
   Check of a state and replacement of the breaker of indexes of turn / alarm system
   Check of serviceability of functioning and replacement of the universal understeering switch
   Check of a state and replacement of the switch of the ignition/cylinder of the lock
   Check of serviceability of functioning of the switch of heating of glass of a door of a back
   Check of a state and repair of a heater of glass of a door of a back
   Replacement of lamps of head headlights
   Adjustment of provision of head block headlights
   Removal and installation of cases of head block headlights
   Replacement of lamps
   Removal and installation of switches of head headlights and screen wiper of a window of a door of a back
   Removal and installation of the radio tape recorder and loudspeakers
   Removal and installation of the antenna
   Check of functioning and replacement of the motor of screen wipers
   Removal and installation of a combination of devices
   Check of functioning and replacement of a horn
   Description of the principle of functioning and diagnostics of a control system of the speed (tempostat)
   Description of the principle of action and diagnostics of the electric drive of lowering lifting of glasses
   The principle of functioning and check of the central lock and system of opening of doors without key
   Principle of action and check of serviceability of the electric drive of change of provision of seats
   Principle of action and check of serviceability of the electric drive of mirrors back look
   Safety cushion - the general information
   Electric circuits - the general information
   Arrangement and purpose of the relay and safety locks
+ Governing bodies and methods of operation



Replacement of lamps

Forward indexes of turn / marker lights

 PERFORMANCE ORDER

  1. Give fixing screws, remove the case of the index of turn, turn a cartridge counterclockwise and take from it a lamp.

Details of installation of a lamp of the index of turn.

  1. Give screws and remove the case of a marker light, having provided access to a lamp.

Details of installation of a lamp of a marker light.

  1. You make installation upside-down.

Back dimensional fires / stoplights / indexes of turn

 PERFORMANCE ORDER

  1. Give bolts and remove a casing of a back marker light.
  1. Give bolts and remove the case of a back marker light, having pulled it strictly back.
  1. Turn a cartridge of a lamp counterclockwise and take it from a back part of the case. Press inside and turn counterclockwise lamps of the index of turn, a stoplight and a back marker light for their extraction from the cartridges.
  1. Turn a cartridge of a lamp and take it from assembly of a lamp - press a lamp inside and, having turned, take from the boss.
  1. You make installation upside-down.

Stoplights of the top level

 PERFORMANCE ORDER

  1. Open a back door. Give the screw and, having hooked, uncover the case. Take a cartridge and replace a lamp, having pulled it for removal strictly vertically. On models of the last years of release uncover, give two bolts and take the case, having turned it, then turn a cartridge counterclockwise, remove it and take a lamp, having pulled it strictly vertically.
  1. Remove a cartridge, then grasp a lamp and pull it from the boss in strictly vertical direction.
  1. You make installation upside-down.

Illumination of a combination of devices

 PERFORMANCE ORDER

  1. For ensuring access to lamps of illumination of a combination of devices it is necessary to remove before a combination (see the Section Check of Serviceability of Functioning of the Switch of Heating of Glass of a Door of a Back). Then lamps can be removed from a back wall of a combination and are replaced.
  2. For extraction of a lamp turn it counterclockwise.
  3. You make installation upside-down.

Illumination of registration plate

 PERFORMANCE ORDER

  1. Give screws and remove an arm of a plate of registration plate, then take lamps from the boss under an arm.

Details of installation of a lamp of illumination of registration plate.

  1. You make installation upside-down.

Internal lighting fixtures

 PERFORMANCE ORDER

  1. Having hooked, take a plafond from the lamp case.
  2. Disconnect a lamp from plugs. Perhaps it is necessary to hook a lamp the lever - at the same time rest the last only against regions of a lamp not to damage flask glass.

Details of installation of the lighting lamp of the luggage compartment.

Details of installation of the lighting lamp of salon.
  1. You make installation upside-down.