Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   General information
   Care of a body
   Care of the finishing panels manufactured of vinyl
   Care of an upholstery and rugs of salon
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Service of loops and locks
   Replacement wind and motionless glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of the lock of a cowl and cable of its drive
   Removal and installation to the place of the panel of a decorative front grille
   Removal and installation of a forward wing
   Removal and installation of bumpers
   Removal and installation of the panel of an internal upholstery of a door
   Removal, installation and adjustment of provision of a door
   Removal and installation of handles, cylinder and clamp (latch) of the lock of a door
   Removal and installation of a windowpane of a door
   Removal and installation of the regulator of a window of a door
   Removal and installation of the central console
   Removal and installation of the panel of an upholstery of a door of a back
   Removal, installation and adjustment of provision of a door of a back
   Replacement of an emphasis of a door of a back
   Removal and installation of facing of a combination of devices
   Removal and installation of facings of the control panel
   Removal and installation of the control panel
   Removal and installation of covers of a casing of a steering column
   Removal and installation of rear-view mirrors
   Remove also installation of a lattice of a fairing
   Removal and installation of seats
   Control body sizes
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Removal and installation of facings of the control panel

See the prevention at the beginning of the Section Removal and installation to the place of the panel of a decorative front grille.

Central facing of the control panel

 PERFORMANCE ORDER

  1. Remove an ashtray.
  2. Give six screws and remove the central facing
  1. Give six screws of fastening of the central facing.
  1. You make installation upside-down.

Facing of the panel of switches

 PERFORMANCE ORDER

  1. Remove the central facing (The section Removal and installation of facing of a combination of devices).
  2. Open a driver's door for ensuring access and removal of the lower panel of a covering.

Details of installation of the lower panel of a covering.

  1. Remove the lower panel of a covering of a steering column and protection of knees.

Details of installation of the lower panel of a covering of a steering column and knee lock.

  1. Give nuts of a steering column and lower the last if in it there is a need.
  2. Give facing fastening screws.
  3. Disconnect facing of the panel of switches, and delay it so that the possibility of a rassoyedineniye of electric sockets appeared. Having disunited sockets remove facing. For ensuring access to the panel of switches turn facing.
  1. Turn facing of the panel for ensuring access to switches.
  1. You make installation upside-down.