Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   General information
   Care of a body
   Care of the finishing panels manufactured of vinyl
   Care of an upholstery and rugs of salon
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Service of loops and locks
   Replacement wind and motionless glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of the lock of a cowl and cable of its drive
   Removal and installation to the place of the panel of a decorative front grille
   Removal and installation of a forward wing
   Removal and installation of bumpers
   Removal and installation of the panel of an internal upholstery of a door
   Removal, installation and adjustment of provision of a door
   Removal and installation of handles, cylinder and clamp (latch) of the lock of a door
   Removal and installation of a windowpane of a door
   Removal and installation of the regulator of a window of a door
   Removal and installation of the central console
   Removal and installation of the panel of an upholstery of a door of a back
   Removal, installation and adjustment of provision of a door of a back
   Replacement of an emphasis of a door of a back
   Removal and installation of facing of a combination of devices
   Removal and installation of facings of the control panel
   Removal and installation of the control panel
   Removal and installation of covers of a casing of a steering column
   Removal and installation of rear-view mirrors
   Remove also installation of a lattice of a fairing
   Removal and installation of seats
   Control body sizes
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Removal, installation and adjustment of provision of a door of a back

 PERFORMANCE ORDER

  1. Open a door of a back and cover the painted body surface over a doorway an old blanket or a special cover.
  2. Remove the panel of an internal upholstery, disunite electric sockets and take plaits of wires from a door.
  3. Lead round a marker flanges of loops of a door of a back.
  4. Having asked the assistant to hold a door, remove a telescopic emphasis (Section Replacement of an Emphasis of a Door of a Back).
  5. Give bolts of loops and remove a back door from the car.
  1. The otdavaniye of bolts of loops of a door of a back (arrow) requires a key like TORX.
  1. You make installation upside-down. At installation to the place of plaits of wires be careful not to cut isolation about keen edges of apertures.
  2. Upon completion of installation close a door of a back and make sure of adequacy of its arrangement in a body aperture.
  3. If the door needs updating of the provision, weaken slightly bolts of loops, carefully close a door and its ottsentruyta in an aperture (the drummer of the lock has to appear on the center of a door). Very carefully open a door and tighten bolts.