Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   General information
   Care of a body
   Care of the finishing panels manufactured of vinyl
   Care of an upholstery and rugs of salon
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Service of loops and locks
   Replacement wind and motionless glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of the lock of a cowl and cable of its drive
   Removal and installation to the place of the panel of a decorative front grille
   Removal and installation of a forward wing
   Removal and installation of bumpers
   Removal and installation of the panel of an internal upholstery of a door
   Removal, installation and adjustment of provision of a door
   Removal and installation of handles, cylinder and clamp (latch) of the lock of a door
   Removal and installation of a windowpane of a door
   Removal and installation of the regulator of a window of a door
   Removal and installation of the central console
   Removal and installation of the panel of an upholstery of a door of a back
   Removal, installation and adjustment of provision of a door of a back
   Replacement of an emphasis of a door of a back
   Removal and installation of facing of a combination of devices
   Removal and installation of facings of the control panel
   Removal and installation of the control panel
   Removal and installation of covers of a casing of a steering column
   Removal and installation of rear-view mirrors
   Remove also installation of a lattice of a fairing
   Removal and installation of seats
   Control body sizes
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Removal, installation and adjustment of provision of a door

 PERFORMANCE ORDER

  1. Remove the panel of an internal upholstery of a door. Disunite electric sockets and push out them with plaits of wires through openings at doors that they did not prevent removal of the last.
  1. Disunite electric sockets (shooters) and take plaits of wires from a door.
  1. Get a jack under a door or ask the assistant to hold it and start removal of bolts of loops.

When using of a jack lay between its head and a surface of a door rags for protection of paint.

  1. Marker lead round heads of bolts, then give bolts and carefully take them from a door.
  1. Before removal of a door a marker mark the adjusting provision of heads of bolts on a loop plate.
  1. You make installation upside-down. Track correctness of an arrangement of loops according to the tags made in the course of dismantle. Having made sure of lack of need of adjustment, tighten bolts.
  2. Upon completion of installation of a door check correctness of its situation, in case of need adjust position of the drummer of the lock.