Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   General information
   Care of a body
   Care of the finishing panels manufactured of vinyl
   Care of an upholstery and rugs of salon
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Service of loops and locks
   Replacement wind and motionless glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of the lock of a cowl and cable of its drive
   Removal and installation to the place of the panel of a decorative front grille
   Removal and installation of a forward wing
   Removal and installation of bumpers
   Removal and installation of the panel of an internal upholstery of a door
   Removal, installation and adjustment of provision of a door
   Removal and installation of handles, cylinder and clamp (latch) of the lock of a door
   Removal and installation of a windowpane of a door
   Removal and installation of the regulator of a window of a door
   Removal and installation of the central console
   Removal and installation of the panel of an upholstery of a door of a back
   Removal, installation and adjustment of provision of a door of a back
   Replacement of an emphasis of a door of a back
   Removal and installation of facing of a combination of devices
   Removal and installation of facings of the control panel
   Removal and installation of the control panel
   Removal and installation of covers of a casing of a steering column
   Removal and installation of rear-view mirrors
   Remove also installation of a lattice of a fairing
   Removal and installation of seats
   Control body sizes
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Removal and installation of a forward wing

See the prevention at the beginning of the Section Removal and installation to the place of the panel of a decorative front grille.


 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. The car also establish to Poddomkratta it on props. Remove a forward wheel.
  3. Remove sideways a casing of a head block headlight, a side marker light and the index of turn (The head Sistema of onboard electric equipment).
  4. Remove assembly of facing of a front bumper (The section Removal and installation of bumpers).
  5. Remove a loker of a wing.

Details of installation of a loker of a forward wing.

  1. Disunite electric sockets of the antenna, lamps of lighting fixtures and the other components capable to interfere with removal of a wing.
  2. Give bolts and nuts of fastening of a wing.
  1. Give bolts and remove a wing.
  1. Remove a wing. Here it will be reasonable to use the help of the assistant in order to avoid injury of a wing or surrounding surfaces of a body.
  2. You make installation upside-down.
  3. Strongly tighten all nuts, bolts and screws.