Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
- Suspension bracket and steering
   General information
   Removal and installation of the forward stabilizer of cross stability and its plugs
   Removal and installation of forward shock-absorbers
   Removal and installation of a cross jet bar of a forward suspension bracket
   Removal and installation of levers of a forward suspension bracket
   Removal and installation of screw springs of a forward suspension bracket
   Removal and installation of rotary fists
   Replacement of spherical hinges
   Removal and installation of a bar of the back stabilizer of cross stability
   Removal and installation of back shock-absorbers
   Removal and installation of a cross jet bar of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation of a steering wheel
   Check of a state, removal and installation of the steering drive
   Removal and installation of the steering mechanism
   Removal and installation of the pump of system of hydrostrengthening of a wheel
   Pumping of system of hydrostrengthening of a wheel
   Wheels and tires - the general information
   The angles of installation of forward wheels - the general information
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Removal and installation of a cross jet bar of a forward suspension bracket

 PERFORMANCE ORDER

  1. The car also establish to Poddomkratta it on props.
  2. Take the forelock and give a nut of fastening of a spherical hairpin on a frame beam arm. Throw out the forelock. After a nut otdavaniye the spherical hairpin has to drop out of an arm. If it does not occur, it is necessary to use a bifurcate divider of spherical hinges. For the purpose of minimization of risk of damage of a cover of the hinge previously grease the tool and a cover.

Details of fixture of a cross jet bar (lobby).

  1. If the spherical hairpin on the top end of a jet bar does not give in to extraction from the top arm of a frame, use a bifurcate divider of spherical hinges.
  1. Give a bolt with a nut of fastening of a jet bar to an arm on right (from the party of the passenger) the forward end of a case of the bridge and remove a bar.
  1. Give a bolt (shooter) with a nut (in a picture it is not visible) and separate the lower end of a jet bar from a frame arm of a case of the bridge.
  1. You make installation upside-down. Tighten fixture with the required effort.