Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
- Suspension bracket and steering
   General information
   Removal and installation of the forward stabilizer of cross stability and its plugs
   Removal and installation of forward shock-absorbers
   Removal and installation of a cross jet bar of a forward suspension bracket
   Removal and installation of levers of a forward suspension bracket
   Removal and installation of screw springs of a forward suspension bracket
   Removal and installation of rotary fists
   Replacement of spherical hinges
   Removal and installation of a bar of the back stabilizer of cross stability
   Removal and installation of back shock-absorbers
   Removal and installation of a cross jet bar of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation of a steering wheel
   Check of a state, removal and installation of the steering drive
   Removal and installation of the steering mechanism
   Removal and installation of the pump of system of hydrostrengthening of a wheel
   Pumping of system of hydrostrengthening of a wheel
   Wheels and tires - the general information
   The angles of installation of forward wheels - the general information
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Removal and installation of the forward stabilizer of cross stability and its plugs

Removal

 PERFORMANCE ORDER

  1. Cock the parking brake. A car front also establish to Poddomkratta it on props. N
  2. Give nuts of fastening of a bar of the stabilizer to connecting links (racks). Pay attention much installation on racks of the top and lower plates and plugs through passage. In case of need replacements of racks just you otboltit them from bridge arms.
  1. For a stabilizer bar detachment from the bridge give the top nut of a rack (the top arrow); if the rack is not subject to replacement, need for an otdavaniye of its lower fixture (a bolt with a nut) (the lower arrow) is absent.
  1. The scheme of installation of plates and plugs of racks through passage of the stabilizer of cross stability (it has to be observed at assembly).
  1. Give fixing bolts of collars of plugs of the stabilizer and remove a stabilizer bar from the car.
  1. For a stabilizer bar detachment from a frame give bolts of collars of plugs (arrow); check a condition of rubber plugs, in case of need replace them.
  1. Remove plugs from the ends of a bar of the stabilizer and examine them on existence of cracks, hardening and other signs of aging of material. Replace the damaged plugs. Check also a condition of plugs in the lower knots of connecting links (racks) of the stabilizer, in case of need replace plugs.

Installation

 PERFORMANCE ORDER

  1. Put on plugs a stabilizer bar.
  2. Pull collars on plugs and lift a stabilizer bar in adjusting situation. Screw bolts of arms, but do not tighten them still finally.
  3. Establish nuts of fastening of a bar of the stabilizer to racks with their washers, remote plugs and rubber plugs, tighten nuts with the required effort.
  4. Tighten bolts of arms with the required effort.