Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
- Suspension bracket and steering
   General information
   Removal and installation of the forward stabilizer of cross stability and its plugs
   Removal and installation of forward shock-absorbers
   Removal and installation of a cross jet bar of a forward suspension bracket
   Removal and installation of levers of a forward suspension bracket
   Removal and installation of screw springs of a forward suspension bracket
   Removal and installation of rotary fists
   Replacement of spherical hinges
   Removal and installation of a bar of the back stabilizer of cross stability
   Removal and installation of back shock-absorbers
   Removal and installation of a cross jet bar of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation of a steering wheel
   Check of a state, removal and installation of the steering drive
   Removal and installation of the steering mechanism
   Removal and installation of the pump of system of hydrostrengthening of a wheel
   Pumping of system of hydrostrengthening of a wheel
   Wheels and tires - the general information
   The angles of installation of forward wheels - the general information
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Wheels and tires - the general information

All cars described in this manual are equipped the metric size radial, tires with a steel or fiber glass breker. Use of tires of other standard size can make negative impact on quality of driving and controllability of the car. Never install on the car of the tire of various type as simultaneous use of radial and diagonal surrounding is fraught to serious complications in driving. Authors of this manual recommend to make at the same time replacement of both wheels of one bridge. In case of replacement of only one wheel, track compliance of a standard size, structure and the drawing of a protector of a spare wheel to remained.

Metric code of the size of the tire

As pressure in tires exerts noticeable impact on controllability of the car and speed of wear of a protector, at least once a month, or before a long trip it is necessary to carry out an inspection of pressure of a rating of tires (The head Nastroyki and routine maintenance).

Replacement of disks has to be made in case of their deformation (bends and dents), emergence of leak of air, emergence of ovality of bolted openings, strong corrosion and vertical asymmetry or impossibility of adequate tightening of nuts of fastening of a wheel.

Correctness of balancing of wheels has significant effect on controllability of the car and efficiency of its braking. Violation of balancing of wheels reduces controllability of the car and comfort of driving, and also reduces service life of tires. When replacing tires it is necessary to carry out balancing of wheels at once (address in tire workshops).