Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
- Suspension bracket and steering
   General information
   Removal and installation of the forward stabilizer of cross stability and its plugs
   Removal and installation of forward shock-absorbers
   Removal and installation of a cross jet bar of a forward suspension bracket
   Removal and installation of levers of a forward suspension bracket
   Removal and installation of screw springs of a forward suspension bracket
   Removal and installation of rotary fists
   Replacement of spherical hinges
   Removal and installation of a bar of the back stabilizer of cross stability
   Removal and installation of back shock-absorbers
   Removal and installation of a cross jet bar of a back suspension bracket
   Removal and installation of levers of a back suspension bracket
   Removal and installation of screw springs of a back suspension bracket
   Removal and installation of a steering wheel
   Check of a state, removal and installation of the steering drive
   Removal and installation of the steering mechanism
   Removal and installation of the pump of system of hydrostrengthening of a wheel
   Pumping of system of hydrostrengthening of a wheel
   Wheels and tires - the general information
   The angles of installation of forward wheels - the general information
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Pumping of system of hydrostrengthening of a wheel

At the end of any procedure demanding a detachment of hydraulic lines system of hydrostrengthening of a wheel it has to be pumped over for the purpose of removal from it of air and receiving adequate strengthening at turn of a steering wheel.

 PERFORMANCE ORDER

  1. Having established forward wheels in rectilinear situation, check system liquid level, in case of need make having added, having brought it to a mark "C" (Cold) in the measuring probe.
  2. Start the engine and leave working at turns of bystry idling. Repeat check of level of liquid in system. In case of need add it to a tag "With" on the probe.
  3. Pump over system, turning the operated wheels from an emphasis against the stop, but without blows to course limiters. At the same time the air which got to system will be distilled from it. In the course of implementation of the procedure you watch that its tank constantly was full.
  4. After air is removed from system again establish wheels in rectilinear situation and before switching off the engine, let's it work some more minutes.
  5. Carry out trial runs, checking serviceability and noiselessness of functioning of steering.
  6. Repeat check of level of liquid at the engine warmed up to the normal working temperature - it has to be in the region of a mark "H" (Hot) in the probe. In case of need make having added (The head Nastroyki and routine maintenance).