Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car

Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
- Coupling and transmission line
   General information
   Coupling - the general description and check of serviceability of functioning
   Removal and installation of components of hydraulic system of switching off of coupling
   Removal, check of a state and installation of components of coupling
   Removal, check of a state and installation of the release bearing of coupling
   Check of a state and replacement of the directing bearing
   Driveshafts, differentials and bridges - the general information
   Check of a condition of the transmission line
   Removal and installation of driveshafts
   Replacement of cardan hinges
   Replacement of an epiploon of a shaft of the leading gear wheel of differential
   Removal, service and installation of a nave and bearings (forward wheel)
   Removal, capital repairs and installation of a forward power shaft
   Removal and installation of assembly of the forward bridge
   Removal and installation of a back half shaft and assembly of the bearing
   Removal and installation of assembly of the back bridge
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation

Check of a condition of the transmission line


  1. Car back also establish to Poddomkratta it on props.
  2. Get under the car and make visual survey of the driveshaft. In case of identification of cracks or deformations of the case of a shaft replace the last.
  3. Check forward and back parts of the driveshaft for existence of signs of leak of oil. Tells traces of leaks around a shaft entrance to transmission or the transfer case about failure of the corresponding epiploon (see the description of the procedure of replacement of an epiploon in the Head Automatic transmission). Leaks since the end of a shaft turned to differential are signs of defect of an epiploon of the leading gear wheel of differential (Section Replacement of an Epiploon of a Shaft of the Leading Gear Wheel of Differential).
  4. Remaining under the car, ask the assistant to turn back wheels to force to rotate the driveshaft. Make sure of smoothness and noiselessness of functioning of cardan hinges. Existence of a side play in hinges also is inadmissible.
  5. Check of a condition of the cardan hinge can be made also at a motionless shaft., having undertaken for Ouse from both of its parties and having tried to rotate its half from each other. Existence of any noticeable side play speaks about wear of the hinge. The side play in hinges can be revealed also raising a shaft.
  6. In conclusion check reliability of tightening of fixing bolts on the ends of the driveshaft.
  7. On models 4WD the listed above checks should be repeated also for the forward driveshaft. Besides, check a shaft for existence of signs of the leakages of the sliding holder of a crosspiece speaking about failure of a sealing cuff of the holder.
  8. Check driveshafts for existence of traces of leaks around an entrance them in the transfer case and differentials. Identification of those speaks about wear of the corresponding epiploons.
  9. Also check for leaks the external ends of sleeves of bridges, near boards of brake mechanisms. Existence of traces of leaks can be the evidence of failure of epiploons of half shafts of the bridge.