Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
+ Cars of the Jeep Grand Cherokee brand
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
- Automatic transmission
   General information
   Diagnostics of malfunctions - the general information
   Removal and installation of the lever of switching
   Check of a state and adjustment of a cable of switching
   The description, replacement and adjustment of a cable of the drive of a butterfly valve in the mode kik-Down (TV cable)
   Serviceability check, adjustment and replacement of the sensor switch of permission of start
   Adjustment of a cable of the parking lock
   Check of a state and replacement of a support of transmission
   Replacement of an epiploon
   Description of a design, removal and installation of lines and hoses of cooling of transmission
   Removal and installation of an additional cooler
   Removal and installation of automatic transmission
   Replacement of the module of management of transmission (TSM) (only for AW-4 and 42RE)
   Diagnostics of system of electronic control by automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Removal and installation of the lever of switching

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. Remove the handle from the lever of switching of transmission. Grasp it and sharply pull, having removed from the lever.
  3. Remove the console (Head Kuzov).
  4. Give fixing screws and remove an arm of the console (Head Kuzov).
  5. Give nuts of fastening of assembly of the lever of switching to a basic cover of the panel of a floor.

Components of assembly of the lever of switching of transmission.

  1. Lift assembly of the lever of switching, having provided thereby access to cables.
  2. Disconnect cables of switching and blocking (See the Sections Check of a State and Adjustment of a Cable of Switching and Adjustment of a Cable of the Parking Lock respectively).
  3. Remove assembly of the lever of switching.
  4. You make installation upside-down.