Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
- Cars of the Jeep Grand Cherokee brand
   + Identification numbers of the car
   Acquisition of spare parts
   + Technology of service, tool and equipment of a workplace
   + Poddomkrachivaniye and towage
   Start of the engine from the auxiliary power supply
   - Automobile chemicals, oils and lubricants
      Cleaners
      The greasing liquids
      Sealants
      Chemicals
      Others
   + Diagnostics of malfunctions
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



The greasing liquids

Motive oils represent specially developed structures for lubricant of internal components of the engine. Usually contain different wide range of the additives serving for prevention of foaming and corrosion. Motive oils are produced various degree of viscosity - from 5 to 80. Need of use of oil of this or that grade usually is defined by climatic conditions and requirements of the concrete engine. Liquid (lungs) oils are usually applied in a frigid climate and at insignificant loads of the engine. Heavy (viscous) oils are used in hot conditions and at strong loads of the engine. All-weather oils possess characteristics of both light, and heavy oils and usually have designations from 5W-20 to 20W-50.

Gearbox oil is developed for application in differentials, RT, and other knots where resistance to influence of high temperatures is required.

Lubricant for components of the chassis and bearings of wheels represents the dense lubricant applied in the knots subject to the raised loadings and friction, such as bearings of wheels, spherical support of a suspension bracket, tips of steering drafts and cardan hinges.

High-temperature lubricant for bearings of wheels is capable to resist to influence of the high temperatures arising in bearings of wheels of the cars equipped with disk brake mechanisms. Usually contains the molybdenum disulfide which is the greasing substance of dry type.

White lubricant (tsiaty) represents the dense lubricant applied on the contacting metal surfaces in places where there are problems with the increased moistening. Remains soft both at low, and at high temperatures, it is not washed away and not diluted by water.

Assembly lubricant represents special lubricant, for application in the conditions of high pressures, usually contains molybdenum and is used for greasing of the knots subject to high loadings (such as radical and conrod bearings and working ledges of cams) before the first start of the engine after completion of capital repairs.

Silicone lubricants are applied to protection of rubber, plastic, vinyl and nylon components.

Graphite lubricants serve applications where oil cannot be used in a type of problems with pollution (for example in locks). Dry graphite perfectly greases metal details, preventing impact on them of pollution, moisture and acids. Lubricant is electrowire and does not break contact in such knots, such as the ignition lock.

The Molibdensoderzhashchy getting structures are applied to simplification of an otdavaniye of the "stuck" fixture, and also to greasing of fixture in order to avoid its corrosion in the future.

Heat-conducting lubricant is not electrowire and serves for installation of electronic modules of ignition from which intensive heat removal is required.