Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
- Cars of the Jeep Grand Cherokee brand
   + Identification numbers of the car
   Acquisition of spare parts
   + Technology of service, tool and equipment of a workplace
   + Poddomkrachivaniye and towage
   Start of the engine from the auxiliary power supply
   + Automobile chemicals, oils and lubricants
   - Diagnostics of malfunctions
      Engine
      Engine electric equipment
      Power supply system
      Cooling system
      Coupling
      Manual Box of Gear Shifting (MBGS)
      Automatic Transmission (AT)
      Transfer case
      Driveshaft
      Bridges
      Brake system
      Suspension bracket and steering
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Transfer case

Switching of a box in the desirable mode is complicated

  1. Speed of the movement of the car can be too big for implementation of desirable switching. Stop the car and switch a box.
  2. Draft of switching is bent or jammed or its fastening weakened. Check draft for existence of signs of wear and damages, in case of need make greasing or replacement of components (The head Automatic transmission).
  3. After the movement of the car for some time on a paved surface switching of torque of the transmission line can happen to difficulty. Stop the car and switch it to not all-wheel drive mode of the movement on a paved surface or on off road terrain.
  4. In a box the insufficient amount of oil, or oil not of that grade is filled in. Empty a box and fill it with oil of the required grade (The head Nastroyki and routine maintenance).
  5. Wear or damage of internal components of the transfer case takes place. Make dismantle and capital repairs of a box (The head Automatic transmission).

In the transfer case there are extraneous noises at the movement on all transfers

In a box the insufficient amount of oil, or oil not of that grade is filled in. Empty a box and fill it with oil of the required grade (The head Nastroyki and routine maintenance).

There is a vyskakivaniye of the transfer case from the all-wheel drive mode of the movement on a low gear

  1. There was no full gearing in the transfer case. Stop the car, transfer the transmission/transmission to neutral situation, then choose the mode 4L (the four-wheel drive, a low gear).
  2. Draft of switching is worn-out or jammed or its fastening weakened. Tighten fixture or make necessary repair or greasing of the corresponding components.
  3. The switching fork is burst, inserts are worn-out or the fork is jammed. Make dismantling and necessary repair (The head Automatic transmission).

Leak of oil through an air vent or epiploons of a secondary (day off) shaft takes place

  1. The transfer case is overflowed with oil. Merge surplus, having normalized level (The head Nastroyki and routine maintenance).
  2. The ventilating path is blocked or the gate is jammed. Clean a path or replace the gate
  3. Incorrectly the epiploon of a secondary (day off) shaft is established or damaged. By means of an emery paper or a thin grinding stone remove agnails.