Jeep Grand Cherokee

1993-1999 of release

Repair and operation of the car



Jeep Grand Cherokee
- Cars of the Jeep Grand Cherokee brand
   + Identification numbers of the car
   Acquisition of spare parts
   + Technology of service, tool and equipment of a workplace
   + Poddomkrachivaniye and towage
   Start of the engine from the auxiliary power supply
   + Automobile chemicals, oils and lubricants
   - Diagnostics of malfunctions
      Engine
      Engine electric equipment
      Power supply system
      Cooling system
      Coupling
      Manual Box of Gear Shifting (MBGS)
      Automatic Transmission (AT)
      Transfer case
      Driveshaft
      Bridges
      Brake system
      Suspension bracket and steering
+ Settings and routine maintenance
+ Line six-cylinder engine
+ V8 engine
+ Procedures of the general and capital repairs of the engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of gear shifting
+ Automatic transmission
+ Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of onboard electric equipment
+ Governing bodies and methods of operation



Diagnostics of malfunctions

In this Section the simplest scheme of clarification of the reasons of the malfunctions and refusals happening in knots and systems of the vehicle is offered. Refusals and their possible reasons are broken into groups on a sign of the relation to certain components or systems of the car, such as the Engine, the Cooling system, etc., besides, in the text references to Chapters and Sections concerning these problems are given.

Remember that the successful completion of search of causes of defect is not result of the black magic available only to skilled professional mechanics at all, and is defined by a combination of a certain knowledge and patient, systematic approach to a problem research. It is necessary to move always from simple to difficult, to bring each check to the logical end and to try not to pass the obvious facts - any can forget to fill fuel in the fuel tank or to leave included in lighting fixtures for the night.

And at last, it is always necessary to make a clear picture of development of malfunction and to take the corresponding steps for prevention of a recurrence. If the failure of electric equipment happened for a cause of infringement of quality of contact, check a condition of all other contacts and electric sockets of system at the same time. If the same safety lock several times in a row continues to fuse, there is no sense simply to continue to replace it - it is necessary to try to find out a cause of failure. Remember that failure of an insignificant component can be a sign of violation of functioning of more important knot or the whole system.